Keenetic 4G (KN-1210)

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

ZyXEL Keenetic 4G (KN-1210)
Availability: Keenetic Launcher

Manuf (OEM/ODM): TP-LINK

(Est.) release date: September 2017
Country of manuf.: China
Series: N300

Type: wireless router

FCC ID: none available
PCB ID: 2050500988

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: MediaTek MT7628NN (575 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (GigaDevice GD25Q128CSIG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (ESMT M14D5121632A)

Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header, (57600 8N1), J13

WI1 chip1: MediaTek MT7628NN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: MediaTek MT7628NN
Switch: MediaTek MT7628NN
LAN speed: 100M
LAN ports: 3
WAN speed: 100M
WAN ports: 1

bgn

Stock bootloader: U-Boot 1.1.3 4.0.0.4_NDMS

Stock FW OS: Linux 4.9

TPFirmware supported: OpenWrt (unofficial)

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 96 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 66 are ZyXEL devices

802dot11 OUI: 50:FF:20 (5 E, 5 W)
Ethernet OUI: 50:FF:20 (5 E, 5 W)

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.


N300 Whole Home Wi-Fi 3G/4G Router

Product page (RU) • Product page (EN)
  • Keenetic 4G (KN-1210)
  • Keenetic Launcher (KN-1211)

Reviews

PCB ID: 2050500988 (TP-LINK)

Serial

 • TFTP • >>
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'KN-1210_recovery.bin'.
 • Bootlog (KN-1210_stable_3.03.C.10.0-0 version firmware 2020-02-13) • >>
U-Boot 1.1.3 [4.0.0.4-10] (Nov 22 2017 - 08:09:11)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb0000

******************************
Software System Reset Occurred
******************************
MediaTek SPI BBU flash driver, SPI clock: 32MHz
flash manufacture id: c8, device id 40 18
find flash: GD25Q128CSIG
============================================
Ralink UBoot Version: 4.0.0.4_NDMS
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Nov 22 2017  Time:08:09:11
============================================
icache: sets:512, ways:4, linesz:32, total:65536
dcache: sets:256, ways:4, linesz:32, total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size = 64 Mbytes

Resetting MT7628 PHY...
Dual image:     on
Boot active:    1
Boot backup:    1
Boot fails:     0

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Enter boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.
 0
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   KN-1210
   Created:      2020-02-13  14:57:37 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1377084 Bytes =  1.3 MB
   Load Address: 80000000
   Entry Point:  80303eac
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80303eac) ...
## Giving linux memsize in MB, 64

Starting kernel ...
LINUX started...
Linux version 4.9-ndm-4 (developers@ndmsystems.com) (gcc version 8.3.0 (crosstool-NG 
 1.24.0-rc2-ndm-7 - NDMS Toolkit 1.0.0) ) #2 Mon Feb 10 19:32:16 MSK 2020
MediaTek SoC: MT7628A, RevID: 0102, RAM: DDR2, XTAL: 40MHz
CPU/OCP/SYS frequency: 580/193/193 MHz
SoC power status: Soft reset occured
CPU0 revision is: 00019655 (MIPS 24KEc)
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Zone ranges:
  Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,57600n8
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Writing ErrCtl register=00079cf0
Readback ErrCtl register=00079cf0
Memory: 60724K/65536K available (3080K kernel code, 244K rwdata, 588K rodata, 
 144K init, 84K bss, 4812K reserved, 0K cma-reserved)
NR_IRQS:40
Setting up vectored interrupts
clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
console [ttyS0] enabled
Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
NET: Registered protocol family 16
clocksource: Switched to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Load Ralink WDG Timer Module
workingset: timestamp_bits=29 max_order=14 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
io scheduler noop registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Registering NDM partitions parser
MediaTek BBU SPI flash driver, SPI clock: 32MHz
SPI flash chip: GD25Q128CSIG (c8 4018c840) (16384 Kbytes)
Bootloader is up to date
di: active = 1, backup = 1, current = 1
14 ndmpart partitions found on MTD device raspi

Creating 14 MTD partitions on "raspi":
0x000000000000-0x000000030000 : "U-Boot"
0x000000030000-0x000000040000 : "U-Config"
0x000000040000-0x000000050000 : "RF-EEPROM"
0x000000050000-0x0000001c0000 : "Kernel_1"
0x0000001c0000-0x0000007e0000 : "RootFS_1"
mtd: device 4 (RootFS_1) set to be root filesystem
0x000000050000-0x0000007e0000 : "Firmware_1"
0x0000007e0000-0x0000007f0000 : "Config_1"
0x0000007f0000-0x000000800000 : "Dump"
0x000000800000-0x000000830000 : "U-State"
0x000000830000-0x000000840000 : "U-Config_res"
0x000000840000-0x000000850000 : "RF-EEPROM_res"
0x000000850000-0x000000fe0000 : "Firmware_2"
0x000000fe0000-0x000000ff0000 : "Config_2"
0x000000000000-0x000001000000 : "Full"

tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ctnetlink v0.93: registering with nfnetlink.
Fast NAT loaded
ip_set: protocol 6
ipip: IPv4 and MPLS over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
ubridge: Tiny bridge driver, 1.2
8021q: 802.1Q VLAN Support v1.8
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Freeing unused kernel memory: 144K
This architecture does not have kernel memory protection.
RNG reseed started
random: crng init done
RNG reseeded
init: init process was started.
init: press Enter to activate this console.
[I] Jan  1 00:00:05 ndm: Core::Main: ***
[I] Jan  1 00:00:05 ndm: Core::Main: *** Network Device Manager 3.03.C.10.0-0.
[I] Jan  1 00:00:05 ndm: Core::Main: *** Built Feb 10 2020 19:24:47.
[I] Jan  1 00:00:05 ndm: Core::Main: ***
[I] Jan  1 00:00:08 ndm: Core::System::Mtd::Table: current firmware image index is 1.
[I] Jan  1 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_proto_gre.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-SCSI subsystem initialized
4/usb-common.ko.
[I] Jan  ip_gre: GRE over IPv4 tunneling driver
1 00:00:09 ndm: Cornf_conntrack_rtsp: loading out-of-tree module taints kernel.
e::System::Drivenf_conntrack_rtsp v0.7 loading
rManager: loading /lib/modules/4phr: module license 'Proprietary' taints kernel.
.9-ndm-4/crypto_Disabling lock debugging due to kernel taint
null.ko.
[phr: I/O peripheral driver. (C) 2013-2019, NDM Systems Inc., v2.2.34
I] Jan  1 00:00:phr: "KN-1210" platform driver loaded
09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4nacct: init, v 1.3
/udp_tunnel.ko.
[I] Jan  1mtdoops_proc: Attached to MTD device 7
 00:00:09 nresetnds: Module loaded.
dm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/scsi_mod.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/ip_gre.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_rtsp.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/phr.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_proto_gre.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/ip6_udp_tunnel.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nls_base.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_h323.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nacct.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/mtdoops_proc.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/resetnds.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modusbcore: registered new interface driver usbfs
ules/4.9-ndm-4/cusbcore: registered new interface driver hub drom.ko.
[usbcore: registered new device driver usb
I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_pptp.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/usbcore.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_h323.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_pptp.ko.
[I] Jan  1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/usbserial.ko.

Models

ZyXEL/Keenetic seriesList of ZyXEL Devices - Wireless Routers
WLAN: WiSoC 1T1R/150Mbps (2.4GHz), Switch: 3x FE (10/100), USB 2.0
WLAN: WiSoC 1T1R/150Mbps (2.4GHz), Switch: 3x FE (10/100), USB 2.0
WLAN: WiSoC 1T1R/150Mbps (2.4GHz), 1x 2dBi (fixed ext), Switch: 5x FE (10/100), USB 2.0
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 3dBi (fixed ext), Switch: 5x FE (10/100), USB 2.0
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 5dBi (fixed ext), Switch: 2x FE (10/100), USB 2.0
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 5dBi, Switch: 4x FE (10/100), USB 2.0 (3G/4G)
Flash: Winbond W25Q128CSIG (16MB SPI), RAM: Winbond W9751G6KB-25 (64MB DDR2)
WLAN: WiSoC 2T2R/300Mbps (2.4GHz), 2x 5dBi, Switch: 4x FE (10/100), USB 2.0 (3G/4G)
Flash: Winbond W25Q256JVFQ (32MB SPI), RAM: Winbond W9751G6KB-25 (64MB DDR2)

Images