Linksys WRP400
Linksys WRP400
Manuf (OEM/ODM): CyberTAN WGV414
Type: wireless router, analog phone gateway
FCC ID: Q87-WRP400
IC ID: 3839A-WRP400
PCB ID: 3763-14141406R
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Marvell 88W8518 (360 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Spansion S29GL064A90TFIR3)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Mira P2V28S40CTP-G6 × 2)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Marvell 88W8518
WI1 chip2: Marvell 88W8010
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8518
Switch: Marvell 88E6061
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Flags: VoIP, 2x FXS ports
Default IP address: 192.168.15.1
the IP 192.168.15.1 is used by 10 additional devices
of which 5 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 58 are Linksys devices
802dot11 OUI: none specified
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Wireless-G Broadband Router with 2 Phone Ports
- • Support page • (Template link outdated)
- • Support page (Cisco)
Per the FCC docs...
- Initial Filing (07/05/2007)
- "3763-14141406R" is silkscreened on the board.
- There is no USB port pictured on the board.. but there are solder pads for one.
- C2PC made 01/23/2009
- "3763-14141403R" is silkscreened on the board.
- The change notice notes that the USB port was added through a class I change.
- The change noted additional USB 3.5G (CDMA) sticks will be tested with the device.
- Sprint - Novatel Wireless Ovation U727 - FCC ID: PKRNVWMC727
- Sprint - Novatel Wireless Ovation U720 - FCC ID: PKRNVWMCD3000
- Sierra Wireless AirCard 595U - FCC ID: N7N-MC5725U
- C2PC made 07/14/2009
- "3763-14141406R" is silkscreened on the board.
- The WLAN PA was changed from a Fairchild RMPA2455 to a Richwave RTC6691E.
Links
- The CPU is stated as a 88W8518 in the boot log. This is presumed to be correct.
- Linksys locking down serial bootloader console on the OpenWrt forums
- WRP400 on the NSLU2-Linux wiki (Internal photos)
See also
- Linksys WRP400-G2 (G3) • Spec. • PCB images
- CPU/WLAN: Marvell 88W8638/88W8010; SW: 88E6061
- "3763-14141404R" is silkscreened on the board.