Loopcomm LP-8616
Loopcomm LP-8616
FCC approval date: 29 December 2009
Country of manuf.: Taiwan
Type: wireless router
FCC ID: VYTLP-8616
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196B
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160DBTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3V28S40ETP-G6)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8191RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: RP-SMA
ETH chip1: Realtek RTL8196B
Switch: Realtek RTL8196B
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 5 are Loopcomm devices
| FCC ID | |
|---|---|
| Rosewill RNX-N400LX | VYTLP-8616 |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Barricade n/g/b 2.4GHz 150Mbps Wireless Cable/DSL Broadband Router
"LOO0020 Rev:1.2 is silkscreened on the board.
Rosewill RNX-N400LX on the DD-WRT forums (high-res internal pictures, OUI derived from label on back of the PCB)
