Rosewill RNX-N400LX
Rosewill RNX-N400LX
Manuf (OEM/ODM): Loopcomm
Type: wireless router
FCC ID: VYTLP-8616
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196B
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160DBTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3V28S40ETP-G6)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8191RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: RP-SMA
ETH chip1: Realtek RTL8196B
Switch: Realtek RTL8196B
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: Rosewill-N400LX
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 1 are Rosewill devices
Default login user: admin
Default login password: guest
admin:guest credentials used by 1 additional devices
of which 1 are Rosewill devices
FCC ID | |
---|---|
Loopcomm LP-8616 | VYTLP-8616 |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
This is a Loopcomm device.
"LOO0020 Rev:1.2" is silkscreened on the board.
On the DD-WRT forums (high-res internal pictures, OUI derived from label on back of the PCB)
- and again (says device uses RTL8186P, which makes no sense considering this is an N-class router)
The power adapter included with the device is an unbranded YHSW-120100U (100-240VAC ~ 50/60Hz, 0.13A max. -> 12VDC 1000mA).