Motorola WA840G v1

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Motorola WA840G v1

Manuf (OEM/ODM): Gemtek

FCC approval date: 09 December 2003

Type: access point

FCC ID: ACQWA840G

Power: 5 VDC, 2 A
Connector type: barrel

CPU1: Broadcom BCM4702 (125 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (AMD Am29LV320DB-90EI)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (AMIC A43L2616V-6 × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 1

WI1 module: Broadcom BCM94306MP
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4306
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA

ETH chip1: Broadcom BCM4702
ETH chip2: Altima AC101L
LAN speed: 100M
LAN ports: 1

bg

Default IP address: 192.168.40.1
the IP 192.168.40.1 is used by 1 additional devices
of which 1 are Motorola devices
Default login user: admin
Default login password: motorola
admin:motorola credentials used by 17 additional devices
of which 17 are Motorola devices

802dot11 OUI: none specified

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Motorola WA840G v1BroadcomBroadcomBroadcom
Motorola WA840G v2BroadcomBroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


User guide

presumably OEM Gemtek, probably model WAPB-102G

This device has the same hardware as the Motorola WE800G v1.

On the DD-WRT forums

Motorola we800g JTAG pinout - DD-WRT forums

WE800G on the OpenWrt wiki

some units may have 2MB Flash and 8MB RAM

The default SSID is probably motorola XXX where XXX is the last three hex digits of the wireless interface MAC (capital letters).