Motorola WE800G v1
Motorola WE800G v1
Manuf (OEM/ODM): Gemtek WAPB-102G
FCC approval date: 24 December 2003
Country of manuf.: Taiwan
Type: bridge
FCC ID: ACQWE800G
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Broadcom BCM4702 (125 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (AMD Am29LV320DB-90EI)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (AMIC A43L2616V-6 × 2)
Expansion IFs: Mini PCI
Mini PCI slots: 1
WI1 module: Broadcom BCM94306MP
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4306
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Broadcom BCM4702
ETH chip2: Altima AC101L
LAN speed: 100M
LAN ports: 1
bg
Default SSID: motorola XXX (2 addl. devices)
Default IP address: 192.168.30.1
the IP 192.168.30.1 is used by 2 additional devices
of which 1 are Motorola devices
Default login user: admin
Default login password: Motorola
admin:Motorola credentials used by 3 additional devices
of which 3 are Motorola devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Motorola WE800G v1 | Broadcom | Broadcom | Broadcom |
Motorola WE800G v2 | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
"WAPB-102G_V01" and "ENG-702-9101" is silkscreened on the main board in the FCC photos.
- This device has the same hardware as the Motorola WA840G v1.
Motorola we800g JTAG pinout - DD-WRT forums
WE800G on the OpenWrt wiki
- some units may have 2MB Flash and 8MB RAM
Default settings (including the SSID) are per the FCC manual and Motorola's User Guide.