Netgear EX7300
Netgear EX7300 v1
(Nighthawk X4)
Availability: now
FCC approval date: 08 April 2016
(Est.) initial retail price (in USD): $170
Country of manuf.: China
Series: AC2200
Amazon image
ASIN
B01D6JEMWS (, On Amazon, On CCC)
multiple revisions of this device, use caution
On Newegg
Type: range extender, mesh node
FCC ID: PY315200317
IC ID: 4054A-15200317
Power: 100-240 VAC ~ 50/60 Hz, 0.5 A
Connector type: AC (direct)
CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB25I × 2)
Expansion IFs: none specified
WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: none
WI2 chip1: Qualcomm Atheros QCA9980
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:4
WI2 antenna connector: none
ETH chip1: Qualcomm Atheros QCA9558
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1
abgn+ac
Flags: MU-MIMO, DFS
Default SSID: NETGEAR_2GEXT (1 addl. devices)
, NETGEAR_5GEXT (1 addl. devices)
Default IP address: 192.168.1.250
the IP 192.168.1.250 is used by 25 additional devices
of which 6 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
---|---|---|---|
Netgear EX7300 | Qualcomm Atheros | Qualcomm Atheros | Qualcomm Atheros |
Netgear EX7300v2 | Qualcomm | Qualcomm | Qualcomm Atheros |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
AC2200 Nighthawk X4 WiFi Mesh Range Extender
- Web GUI: www.mywifiext.net
WI2 is not identifiable in the FCC photos but is assumed
- to be a Qualcomm Atheros QCA9980 or a QCA9990.
The Netgear EX6400 appears to be internally identical to this device.
- An FCC C2PC Request available on 8/18/2017 adds DFS support via software enabling.
- EX6400 / EX7300 Firmware Version 1.0.1.60 "Supports CE DFS Band 2 and Band 3."