Netgear ME103
Netgear ME103
Manuf (OEM/ODM): SerComm
FCC approval date: 26 March 2003
Country of manuf.: Taiwan
Type: access point
FCC ID: PY3ME103
IC ID: 4054A-ME103
Power: 12 VDC, 0.8 A
Connector type: barrel
CPU1: Texas Instruments TNETW5305
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800TTC-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (ICSI IC42S16100-7T × 2)
Expansion IFs: none specified
WI1 chip1: Texas Instruments ACX100
WI1 802dot11 protocols: b
WI1 antenna connector: RP-SMA
ETH chip1: Texas Instruments TNETW5305
Switch: ADMtek ADM6996
LAN speed: 100M
LAN ports: 1
b
Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.0.224
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
802.11b ProSafe Wireless Access Point
• Support page
"MADE IN TAIWAN", "4900K310", and "NEE 2M 94V-0" (etc, etc) is silkscreened on the board (which is essentially the same as the SerComm IP706ST's board).
- G-LUXON and Lelon radial capacitors are in use on a sample production board.
The FCC operational description states the devices uses TNETW5305 and ACX100. The Flash and RAM is stated as being 1MB and 4MB, respectively.. but with the possibility for upgrade from the OEM.
- Per unit noted above, this is correct. The presumed TNETW5305 is marked CF74I553GGW<\n>C 3BACT JW.
According to the manual, the default SSID is NETGEAR.