Netgear WAB102
Netgear WAB102
Manuf (OEM/ODM): Z-Com
Type: access point
FCC ID: PY3WAB102
IC ID: 4054A-WAB102
Power: 5 VDC, 4 A
Connector type: barrel
CPU1: Atheros AR5311
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Toshiba TC58FVT321FT-10)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Micron MT48LC2M32B2)
Expansion IFs: none specified
WI1 chip1: Atheros AR5311
WI1 chip2: Atheros AR5111
WI1 802dot11 protocols: a
WI1 antenna connector: unknown
WI2 module: Z-Com XI-1250
WI2 module IF: Ethernet
WI2 chip1: Atmel AT76C502A
WI2 chip2: RFMD Model?
WI2 chip3: RFMD Model?
WI2 802dot11 protocols: b
WI2 antenna connector: none
ETH chip1: Atheros AR5311
ETH chip2: Realtek Model?
ETH chip3: Realtek Model?
ETH chip4: Realtek RTL8019AS
LAN speed: 100M
LAN ports: 1
ab
Stock FW OS: VxWorks 5.4.2
Flags: DFS
Default IP address: 192.168.0.226
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 3 are Netgear devices
802dot11 OUI: none specified
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
802.11a+b Dual Band Access Point
• Support page
Manual
"XI1250V1.0" and "2002.08.05" is silkscreened on the AT76C502A wireless module.
- The module is a Z-Com XI-1250.
- The module has a Realtek RTL8019AS on-board to apparently provide the AT76C502A with an Ethernet interface and to link it to the main board.
The default SSID is, according to the manual, Wireless for both wireless interfaces. The Flash appears to be a 32Mbit Toshiba TC58FVT321FT-10.
Stock firmware
Notes
- OS: VxWorks 5.4.2
- firmware is a VxWorks elf image with zlib compression
Netgear's FW notes / changelog
WAB102 Firmware Version 1.2
Published Dec 18, 2002
Modifications and Fixes:
This firmware is based on Atheros AP21 reference code 2.1.1.7.
Supports General European domain. Allows users to select country code if access point operating system shipped with General European domain (WAB102-GE)
The baseband of 8.2.11b/2.4 GHz is programmed with a set of register values to improve the range of 802.11b/2.4 GHz wireless service
WAB102 Firmware Version 1.2.1
Published March 3, 2003
Modifications and Fixes
Allow users to change the Default Gateway Address when DHCP client is disabled.
Allow DHCP Discovery and Response packets passed to the associated wireless clients.
WAB102 Firmware Version 1.2.3
Published May 2, 2003
Modifications and Fixes:
Improve the 802.11b Wireless Link stability and extends the range
Enable the 11a Turbo mode for WAB102-AU and China users.
