Netgear WNR1000v3

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Netgear WNR1000 v3

Manuf (OEM/ODM): Foxconn U12H139 .99

FCC approval date: 16 November 2009
Country of manuf.: China, Vietnam

Type: wireless router

FCC ID: PY309300117
IC ID: 4054A-09300117

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Broadcom BCM5356A1 (333 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3205DM2I-12G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ISSI IC42S16800E-6TL)

Expansion IFs: none specified
Serial: yes, internal, unpopulated, 6-pin header, (115200,8,N,1), 3.3V TTL, J3

WI1 chip1: Broadcom BCM5356A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Broadcom BCM5356A1
Switch: Broadcom BCM5356A1
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Stock bootloader: CFE 3.0.6 vendor modified

Stock FW OS: Linux 2.4.20

Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 106 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Netgear WNR1000v1AtherosAtherosAtheros
Netgear WNR1000v2AtherosAtheros
Netgear WNR1000v2h2AtherosAtheros
Netgear WNR1000v3BroadcomBroadcom
Netgear WNR1000v4MediaTekMediaTek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Wireless-N 150 Router

 • Support page

"U12H139T99" and "Rev.0 GP" is silkscreened on the boards.

The same hardware is also used for the Netgear WGR614v10.

OUIs may include 20:4E:7F, 84:1B:5E OUI

Serial

Pinout

(GND) (TxD) (...) (...) (RxD) (+3.3v)
  o     o     o     o     o     o
  6     5     4     3     2     1
                       J3

Info derived from

 • boot log
Decompressing...done
Decompressing...done

CFE for WNR1000v3 version: 3.0.6
Build Date: Thu Jan 21 22:38:48 CST 2010
Boot partition size = 131072(0x20000)
Found a 4MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46
Device eth0:  hwaddr C0-3F-0E-F0-FF-0C, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CPU ProcId is: 0x00019749, options: 0x000021cd
Primary instruction cache 32kb, linesize 32 bytes (4 ways)
Primary data cache 32kb, linesize 32 bytes (4 ways)
Linux version 2.4.20 (zacker@svn) 
(gcc version 3.2.3 with Broadcom modifications) 
#1 Fri Jul 16 18:22:57 CST 2010
Found a 4MB ST compatible serial flash
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM5356 rev 1 at 333 MHz
Calibrating delay loop... 166.29 BogoMIPS
Memory: 14312k/16384k available 
(1408k kernel code, 2072k reserved, 108k data, 60k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
sflash: squash filesystem with lzma found at block 706
Creating 10 MTD partitions on "sflash":
0x00000000-0x00020000 : "boot"
0x00020000-0x003c8000 : "linux"
0x000b0ae0-0x003c8000 : "rootfs"
0x003c8000-0x003d8000 : "ML1"
0x003d8000-0x003e8000 : "ML2"
0x003e8000-0x003f0000 : "T_Meter1"
0x003f0000-0x003f8000 : "T_Meter2"
0x003f8000-0x003f9000 : "POT"
0x003f9000-0x003fa000 : "board_data"
0x003fa000-0x00400000 : "nvram"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k freed
Reading board data...
WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a
NTP synchronized date/time: Sat Aug 20 23:40:59 2011
MAC address of 1st STA connected: 00-21-63-1E-D2-23
Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o
Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Hit enter to continue...WARNING: console log level set to 1
killall: upnp: no process killed
UPnP daemon is ready to run
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
Reading board data...
WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a
Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
POT integrity check OK.
POT time is up.
IOCTL_AG_REGION_SET: English
Start DHCP client daemon
info, udhcp client (v0.9.8) started
vlan1: No such process
Hit enter to continue...Info: No FWPT default policies.
Using /lib/modules/2.4.20/kernel/net/ipv4/multissidcontrol/MultiSsidControl.o
httpd: socket bound in 192.168.1.1:80.