Netgear WGR614v10
Netgear WGR614 v10
Manuf (OEM/ODM): Foxconn
FCC approval date: 16 November 2009
Country of manuf.: China, Vietnam
Type: wireless router
FCC ID: PY309300117
IC ID: 4054A-09300117
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM5356A1 (300 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ISSI IC42S16800E-6TL)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5356A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Broadcom BCM5356A1
Switch: Broadcom BCM5356A1
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 105 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 421 additional devices
of which 302 are Netgear devices
802dot11 OUI: 30:46:9A (11 E, 14 W), 4C:60:DE (5 E, 6 W), 74:44:01 (7 E, 6 W), C0:3F:0E (14 E, 12 W), C4:3D:C7 (8 E, 5 W)
Ethernet OUI: 30:46:9A (11 E, 14 W), 4C:60:DE (5 E, 6 W), 74:44:01 (7 E, 6 W), C0:3F:0E (14 E, 12 W), C4:3D:C7 (8 E, 5 W)
| FCC ID | |
|---|---|
| Netgear WNR1000v3 | PY309300117 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Netgear WGR614v1 | Brecis | Intersil | Intersil |
| Netgear WGR614v10 | Broadcom | Broadcom | |
| Netgear WGR614v2 | Atheros | Atheros | Atheros |
| Netgear WGR614v3 | Atheros | Atheros | Atheros |
| Netgear WGR614v4 | Marvell | Marvell | Marvell |
| Netgear WGR614v5 | Broadcom | Broadcom | Broadcom |
| Netgear WGR614v6 | Broadcom | Broadcom | Broadcom |
| Netgear WGR614v7 | Atheros | Atheros | |
| Netgear WGR614v8 | Broadcom | Broadcom | |
| Netgear WGR614v9 | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless-G Router
• Support page
The same hardware is also used for the WNR1000v3. The device was originally locked to 802.11b/g speeds only (despite being single-stream 802.11n capable), but the latest Netgear firmware enabled 802.11n capability for the device.
Netgear WGR614 v10 on TechInfoDepot
On the DD-WRT forums, and again
TomatoUSB and the WGR614v10
Manuf. by Foxconn / Hon Hai / Ambit
Per the manual, the default SSID is NETGEAR.
