Netgear WNR3500v1

From WikiDevi.Wi-Cat.RU
(Redirected from Netgear WNR3500 v1)
Jump to navigation Jump to search

Netgear WNR3500 v1
Availability: now

Manuf (OEM/ODM): Foxconn U12H092 T00

FCC approval date: 02 January 2008
Country of manuf.: China
Series: N300

Type: wireless router

FCC ID: PY307300074
IC ID: 4054A-07300074
PCB ID: U12H092T00

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Marvell 88F5180NB1 (500 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640DBTC-90G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Samsung K4H561638J-LCCC)

Expansion IFs: none specified
Serial: yes, 6-pin header, internal, unpopulated, 3.3V TTL, (115200,8,N,1), JP2

WI1 chip1: Marvell 88W8363
WI1 chip2: Marvell 88W8060
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: none

ETH chip1: Marvell 88F5180NB1
ETH chip2: Marvell 88E1112
ETH chip3: Marvell 88E1112
Switch: Marvell 88E6131
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

bgn

Additional chips
2.4GHz Power Amplifier IC;RFMD;RF5125;RF, 5125, H9F8;2;

Stock bootloader: U-Boot 1.1.1 Marvell

Stock FW OS: Linux 2.4.27 -vrs1

Flags: boot log

Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 106 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices

802dot11 OUI: 00:1F:33 (8 E, 12 W), 00:24:B2 (14 E, 16 W)
Ethernet OUI: 00:1F:33 (8 E, 12 W), 00:24:B2 (14 E, 16 W)

For a list of all currently documented Marvell chipsets with specifications, see Marvell.


RangeMax Wireless-N Gigabit Router

 • Support page

Netgear WNR3500 v1 on TechInfoDepot

Per a dissected US unit..

  • "U12H092", "Rev. 2", and "GP" is silkscreened on the board.
All radial capacitors used are CapXon branded.
  • The device has 8MB Flash and 32MB RAM.
The specific P/Ns used are in the infobox.
The netgear.com.cn device table also specifies
the device as having 8MB Flash and 32MB RAM.
2.4-2.5GHz Power Amplifier ICs

Serial

Pinout

(3.3) (RxD) (...) (...) (TxD) (GND)
1               JP2

Info derived from

 • Serial info
====version====
# version
Release version : Netgear Wireless Router WNR3500
                  U12H09200/V1.0.36/8.0.36NA
           Time : Jun 11 2009 11:21:42
Boot code version : 1.0.3

====cat /proc/version====
# cat /proc/version
Linux version 2.4.27-vrs1 (weal@svn) (gcc version 3.4.4 (release) 
 (CodeSourcery ARM 2005q3-1)) #1 Thu Jun 4 15:04:37 CST 2009

====cat /proc/cpuinfo====
# cat /proc/cpuinfo
Processor       : ARM926EJ-Sid(wb) rev 0 (v5EJl)
BogoMIPS        : 332.59
Features        : swp half thumb fastmult

Hardware        : MV-88fxx81
Revision        : 0000
Serial          : 0000000000000000

====cat /proc/cmdline====
# cat /proc/cmdline
console=ttyS0,115200 root=/dev/mtdblock2 
mtdparts=phys_mapped_flash:1m(kernel),2m@1m(rootfs),1m@3m(uboot)ro

====cat /proc/meminfo====
# cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  14909440 14462976   446464        0  1241088  2596864
Swap:        0        0        0
MemTotal:        14560 kB
MemFree:           436 kB
MemShared:           0 kB
Buffers:          1212 kB
Cached:           2536 kB
SwapCached:          0 kB
Active:           3608 kB
Inactive:         2912 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        14560 kB
LowFree:           436 kB
SwapTotal:           0 kB
SwapFree:            0 kB

====cat /proc/mtd====
# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00800000 00010000 "Physically mapped flash"
mtd1: 00100000 00010000 "kernel"
mtd2: 00630000 00010000 "rootfs"
mtd3: 00010000 00010000 "traffic_meter1"
mtd4: 00010000 00010000 "traffic_meter2"
mtd5: 00010000 00010000 "POT"
mtd6: 00010000 00010000 "board_data"
mtd7: 00010000 00010000 "nvram"
mtd8: 00080000 00010000 "u-boot"
mtd9: 00800000 00010000 "all"
 • boot log
Boot code version : 1.0.3

 ** MARVELL BOARD: RD-88F5181L-VOIP-GE LE
U-Boot 1.1.1 (Jan 25 2008 - 09:11:36) Marvell version: 1.10.16

DRAM CS[0] base 0x00000000   size  16MB
DRAM Total size  16MB
[8192kB@ff800000] Flash:  8 MB
Addresses 12M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (12M - 8M): Done
*** Warning - bad CRC, using default environment

Soc: 88F5181 B1
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 166Mhz , TClock = 166Mhz

USB 0: host mode
PCI 0: PCI Express End Point Interface
PCI 1: Conventional PCI, speed = 33000000
Net:   egiga0 [PRIME]
Hit any key to stop autoboot:  0
Decompressing kernel...
## Booting image at 00400000 ...
   Image Name:   Linux-2.4.27-vrs1
   Created:      2009-06-11   3:22:18 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1428280 Bytes =  1.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
Starting kernel ...

ZLinux version 2.4.27-vrs1 (weal@svn) (gcc version 3.4.4 (release) 
 (CodeSourcery ARM 2005q3-1)) #1 Thu Jun 4 15:04:37 CST 2009
CPU: ARM926EJ-Sid(wb) revision 0
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 166666667, Tclk = 166666667
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 mtdparts=phys_mapped_flash:1m(kernel),2m@1m(rootfs),1m@3m(uboot)ro
Calibrating delay loop... 332.59 BogoMIPS
Memory: 16MB 0MB 0MB 0MB = 16MB total
Memory: 14492KB available (1231K code, 374K data, 68K init)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
init hw started.

CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size  16MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size   1MB
PCI0_MEM ....base e8000000, size 128MB
PCI0_IO ....base f2100000, size   1MB
INTER_REGS ....base f1000000, size   1MB
DEVICE_CS0 ....no such
DEVICE_CS1 ....no such
DEVICE_CS2 ....no such
DEV_BOOCS ....base f4000000, size  16MB
Flash bankwidth 2, base f4000000, size 1000000
PCI: bus0: Fast back to back transfers enabled
HW already initialized.
PCI: bus1: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
WatchDog enabled.

  Marvell Development Board (LSP Version 1.1.3)
  -- RD-88F5181L-VOIP-GE  Soc: 88F5181 B1
 Detected Tclk 166666667 and SysClk 166666667
TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xf1012000 (irq = 3) is a 16550A
Marvell Gateway Driver:
Detected RD_88F5181L_VOIP_GE
Wireless atthena LED button turned off
Using VLAN-tag Mode
L3/L4 Checksum offload enabled
Multi queue support ( rxq0=128 rxq1=64 rxq2=64 rxq3=64 txq0=2000 )
Using boot network interface configuration
eth0: mac_addr 00:1f:33:4b:91:07, VID 0x100, port list: port-0
eth1: mac_addr 00:1f:33:4b:91:06, VID 0x200, port list: port-1 port-2 port-3 port-4
init switch layer... done
init MAC layer... done
loading network interfaces: eth0 eth1
PPP generic driver version 2.4.2
physmap flash device: 1000000 at f4000000
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Using physmap partition definition

Creating 9 MTD partitions on "Physically mapped flash":
0x00000000-0x00100000 : "kernel"
0x00100000-0x00730000 : "rootfs"
0x00730000-0x00740000 : "traffic_meter1"
0x00740000-0x00750000 : "traffic_meter2"
0x00750000-0x00760000 : "POT"
0x00760000-0x00770000 : "board_data"
0x00770000-0x00780000 : "nvram"
0x00780000-0x00800000 : "u-boot"
0x00000000-0x00800000 : "all"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Fast Floating Point Emulator V0.94M by Peter Teichmann.
mount_block_root: mtdblock/2
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 68K
init started:  BusyBox v1.01 (2009.03.03-08:18+0000) multi-call binary
mv_gateway: starting eth0
mv_gateway: starting eth1
/sbin/syslogd: not found
/proc/sys/net/ipv4/neigh/br0/base_reachable_time: cannot create
Reading board data...
WSC UUID: 0x93130468f8a39c3e3950eacf3d452c23
Using /lib/modules/2.4.27/net/acos_nat.o
Warning: loading acos_nat will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.27/ap8x/ap8x.o
Warning: loading ap8x will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
ap0: Marvell AP-8x 802.11n adapter: mem=0xe8000000, irq=36
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
Waiting for Wireless Events from interfaces...
device eth1 entered promiscuous mode
device ap0 entered promiscuous mode
br0: port 2(ap0) entering learning state
br0: port 1(eth1) entering learning state
ARPING to 255.255.255.255 from 192.168.1.1 via br0
br0: port 2(ap0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth1) entering forwarding state
br0: topology change detected, propagating
Sent 3 probes (3 broadcast(s))
Received 0 reply
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
Info: No FWPT default policies.
wlanconfigd: No such file or directory
POT integrity check OK.
POT time is up.
Starting WPS module ...
mv_gateway: stopping eth0
mv_gateway: eth0 change mac address to 00:1f:33:4b:91:07
mv_gateway: starting eth0
Start DHCP client daemon

BusyBox v1.01 (2009.03.03-08:18+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# WPS Version: 14.1, December 11 2008
Wireless atthena LED button turned on
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
WLAN: MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
ap0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated

====cat /proc/bus/pci/devices====
# cat devices
0138    11ab2a0a        24      e8000000        e8010000        00000000        00000000        00000000        00000000        00000000        00010000  00010000 00000000        00000000        00000000        00000000        00000000        ap%d

====lsmod====
# lsmod
Module                  Size  Used by    Tainted: P
ap8x                  798272   1
acos_nat              290340   0 (unused)

====ps aux====
# ps aux
  PID  Uid     VmSize Stat Command
    1 0           428 S   init
    2 0               SW  [keventd]
    3 0               SWN [ksoftirqd_CPU0]
    4 0               SW  [kswapd]
    5 0               SW  [bdflush]
    6 0               SW  [kupdated]
    7 0               SW  [mtdblockd]
  141 0           428 S   /sbin/iwevent
  147 0           456 S   swresetd
  149 0           840 S   upnpd
  151 0           384 S   dnsRedirectReplyd
  153 0           808 S   httpd
  157 0           476 S   udhcpd /tmp/udhcpd.conf
  160 0           508 S   dnsmasq -h -n -c 0 -N -i br0 -r /tmp/resolv.conf -u r
  161 0           480 S   ddnsd &
  164 0           352 S   telnetenabled
  166 0           556 S   heartbeat
  174 0           728 S   /usr/sbin/email
  181 0           584 S   lld2d br0
  213 0           588 S   wpsd
  217 0          1228 S   wsccmd /tmp/wsc
  220 0           424 S   udhcpc -i eth0 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
  222 0           496 R   /bin/sh
  225 0          1228 S   wsccmd /tmp/wsc
  226 0          1228 S   wsccmd /tmp/wsc
  227 0          1228 S   wsccmd /tmp/wsc
  228 0          1228 S   wsccmd /tmp/wsc
  229 0          1228 S   wsccmd /tmp/wsc
  230 0          1228 S   wsccmd /tmp/wsc
  231 0          1228 S   wsccmd /tmp/wsc
  232 0          1228 S   wsccmd /tmp/wsc
  233 0           732 S   hostapd -W /tmp/wsc/hostapd.conf
  599 0           552 R   ps aux

Images

How To Identify Which Model Router You Have

by benryanau

After spending an hour researching the variants of the Netgear WNR3500 family and their

specs prior to a purchase, I realized this would he handy to post up somewhere.

So, I thought I'd table it up and share it, since there wasn't a concise guide anywhere

on the web already. Hopefully this will help some people out!
Model Flash
/RAM
CPU USB Ant WLAN Eth WAN Notes FCC ID
WNR3500 v1 8/32 Marvell
88F5180NB1
@500 TopDog
No 2 int. N300 4x GbE GigE Blue Antenna LEDs on top PY307300074
WNR3500 v2 4/32 Broadcom
BCM4718A
@480 MIPS74k
No 4 int. N300 4x GbE GbE "V2" marked under orange LAN ports,
smaller housing, no antenna LEDs
PY308400093
WNR3500L V1 8/64 Broadcom
BCM4718A
@480 MIPS74k
1x
USB 2.0
4 int. N300 4x GbE GbE WNR3500U/WNR3500L Marked
below yellow WAN port
PY308400093
WNR3500L V2 128/128 Broadcom
BCM47186B0
@480 MIPS74k
1x
USB 2.0
2 int. N300 4x GbE GbE Below yellow WAN port WNR3500L v2 PY310400153
Images