Netgear WNR3500Lv2
Netgear WNR3500L v2
Manuf (OEM/ODM): Foxconn U12H172 T00
FCC approval date: 13 July 2011
Series: N300
Type: wireless router
FCC ID: PY310400153
IC ID: 4054A-10400153
PCB ID: U12H172T00
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Broadcom BCM47186B0 (480 MHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung K9F1G08U0D)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W971GG6JB-25)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM47186B0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Broadcom BCM47186B0
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
TPFirmware supported: Vampik (wl500g mod), Tomato (Shibby) • (List | DLs), TomatoUSB RAF (Victek) • (List | DLs)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1295 additional devices
of which 105 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 421 additional devices
of which 302 are Netgear devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Netgear WNR3500Lv1 | Broadcom | Broadcom | |
| Netgear WNR3500Lv2 | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
N300 Wireless Gigabit Router
OEM: Foxconn (Hon Hai) U12H172T00/U12H172T99
FCC photos show the device with a Broadcom BCM4718A1 WiSoC, BCM4331
- wireless chip, and a W9751G6JB-25 RAM chip. This is completely wrong.
- Internal photos on OpenLinksys.info
- Tomato dla Netgear WNR3500L v2 on OpenLinksys.info (PL)
Netgear WNR3500L v2.0 on TechInfoDepot
- Techdata: Netgear WNR3500L v2 on OpenWRT
Firmware
- DD-WRT supported (r28112 and above)
- OpenWRT trunk isn't supported: kernel 2.6 omit needed NAND flash driver, work in progress
- Tomato supported
- Firmware by Vampik (Ru), based on the firmware by lly и theMIROn, based on the firmware «by Oleg».
- Debricking
Forum threads
- On the DD-WRT forums
- On MyOpenRouter forums
- How to Install Third Party Firmware on Netgear WNR3500Lv2
- Quick Review and Specifications of Netgear WNR3500Lv2
- OUI of A0:21:B7 pictured in these router screenshots
Models
- Netgear WNR3500v1 • WNR3500 • U12H092T00 (Marvell)
- Netgear WNR3500v2 • WNR3500V2 • U12H127T00_NETGEAR
- Netgear WNR3500v2(VCNA) • WNR3500V2VC • U12H127T70
- Netgear WNR3500U • WNR3500U • U12H136T00_NETGEAR
- Netgear WNR3500Lv1 • WNR3500L • U12H136T99_NETGEAR
- Netgear WNR3500Lv2 • WNR3500LV2 • U12H172T00/U12H172T99
How To Identify Which Model Router You Have
After spending an hour researching the variants of the Netgear WNR3500 family and their
- specs prior to a purchase, I realized this would he handy to post up somewhere.
So, I thought I'd table it up and share it, since there wasn't a concise guide anywhere
- on the web already. Hopefully this will help some people out!
| Model | Flash /RAM |
CPU | USB | Ant | WLAN | Eth | WAN | Notes | FCC ID |
|---|---|---|---|---|---|---|---|---|---|
| WNR3500 v1 | 8/32 | Marvell 88F5180NB1 @500 TopDog |
No | 2 int. | N300 | 4x GbE | GigE | Blue Antenna LEDs on top | PY307300074 |
| WNR3500 v2 | 4/32 | Broadcom BCM4718A @480 MIPS74k |
No | 4 int. | N300 | 4x GbE | GbE | "V2" marked under orange LAN ports, smaller housing, no antenna LEDs |
PY308400093 |
| WNR3500L V1 | 8/64 | Broadcom BCM4718A @480 MIPS74k |
1x USB 2.0 |
4 int. | N300 | 4x GbE | GbE | WNR3500U/WNR3500L Marked below yellow WAN port |
PY308400093 |
| WNR3500L V2 | 128/128 | Broadcom BCM47186B0 @480 MIPS74k |
1x USB 2.0 |
2 int. | N300 | 4x GbE | GbE | Below yellow WAN port WNR3500L v2 | PY310400153 |
Picture of the back of WNR3500U/3500L v1
Picture of the back of WNR3500L v2
Picture of the back of WNR3500U
Closeup of label WNR3500U
