Sagemcom F@ST 2804 V7
Sagemcom F@ST 2804 V7 (rev1)
Manuf (OEM/ODM): SGE
FCC approval date: 13 November 2012
Country of manuf.: China
Type: wireless router, dsl modem
FCC ID: VW3FAST1704N
IC ID: 9140A-FAST1704N
Power: 12 VDC, 0.5 A
Connector type: barrel
CPU1: Broadcom BCM6318 (333 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406E)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AB160TSD)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM43217
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM6318
Switch: Broadcom BCM6318
LAN speed: 100M
LAN ports: 4
bgn
Flags: ADSL2+
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 10 are Sagemcom devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 8 are Sagemcom devices
FCC ID | |
---|---|
Sagemcom F@ST 1704N | VW3FAST1704N |
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Sagemcom F@ST 2804 V5 | Broadcom | Broadcom | |
Sagemcom F@ST 2804 V7 | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
- WI1 may be 1x1:1, MIMO may be not implemented on boards for some ISPs
- (components for second RF chain may be not installed)
See also
- Sagemcom F@ST 2704N V1 - Broadcom BCM6318/BCM43217 (OpenWrt)
- Sagemcom F@ST 2704 V2 (RTC) - Broadcom BCM6328B0 (OpenWrt)
- Sagemcom F@ST 2804 V2 (MTS) - Broadcom BCM6358U (RKFBG) (2x @300MHz)
- Sagemcom F@ST 2804 V5 (UTEL) - Broadcom BCM63281/BCM43227
- Sagemcom F@ST 2804 V7 rev1 - Broadcom BCM6318 (HW:1704N_1864) PPage
- Sagemcom F@ST 2804 V7 rev2 - Broadcom BCM63281 (KFBG)/BCM43217T (KMLG)
- Mira 2011/ Nanya 2012 (HW: 2704_1864) (4PDA forums, Sagemcom 2804)
- PCB: GAN5GT94A-C REV1.0 (1x USB 2.0), Nanya NT5TU32M16DG-AC, BCM43217T