SerComm PS801Hv1
SerComm PS801H v1
FCC approval date: 15 July 2004
Country of manuf.: Taiwan
Type: print server
FCC ID: P270NT00
IC ID: 550A-15029
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800TTC-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (EtronTech EM636165TS-6 × 2)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8510
LAN speed: 100M
LAN ports: 1
bg
Default IP address: 192.168.0.100
the IP 192.168.0.100 is used by 18 additional devices
of which 1 are SerComm devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| USRobotics USR5436 | P270NT00 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| SerComm PS801Hv1 | Marvell | Marvell | Marvell |
| SerComm PS801Hv2 | RDC | Ralink | Ralink |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
The FCC internal photos are perma-confidential for some reason.. but the FCC test report does have some.
- "4900NT0CB" or something is silkscreened on the board.
This device is using an NEC USB 2.0 controller.
The default IP address is from the FCC manual.
