USRobotics USR5436
USRobotics USR5436
Manuf (OEM/ODM): SerComm PS801H v1
Type: print server
FCC ID: P270NT00
IC ID: 550A-15029
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800TTC-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (EtronTech EM636165TS-6 × 2)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8510
LAN speed: 100M
LAN ports: 1
bg
Default IP address: 192.168.0.100
the IP 192.168.0.100 is used by 18 additional devices
of which 0 are USRobotics devices
FCC ID | |
---|---|
SerComm PS801Hv1 | P270NT00 |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Wireless USB Print Server
• Support page
The FCC internal photos are perma-confidential for some reason.. but the FCC test report does have some.
- "4900NT0CB" or something is silkscreened on the board.
This device is using an NEC USB 2.0 controller.