Tenda W268R (later)

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Tenda W268R (later)

FCC approval date: 09 September 2011
Country of manuf.: China

Type: wireless router

FCC ID: V7T268R

Power: 9 VDC, 0.6 A
Connector type: barrel
Conn. measurements: 5.2 mm (OD), 3 mm (ID), 10 mm (LEN)

CPU1: Broadcom BCM5356
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Winbond W25Q16)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM5356
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Broadcom BCM5356
Switch: Broadcom BCM5356
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Default SSID: Tenda (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 33 are Tenda devices

802dot11 OUI: C8:3A:35 (22 E, 34 W)
Ethernet OUI: C8:3A:35 (22 E, 34 W)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Wireless-N Broadband Router

Some devices w/ labeled FCC IDs of V7T268R may not actually use this board - one labeled as such was RT3050 based (the board was labeled as being for the W311R) w/ 2 MB Flash and 16 MB RAM

Based on the FCC filing date of this device, earlier model units may use BCM5356B0 rather than C0..

The default SSID for this device is assumed to remain as Tenda.

Used PSU(s)

At least some of these routers are using Shenzhen Heweishun Network Technology TEA09-09060s (9V, 0.6A).

Shenzhen Heweishun Network Technology TEA09-09060 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.3 A
 Input connector: NEMA 1-15P
Style: small, horiz.  Manuf. in: China  Eff. level: 5
Output: 9 VDC, 0.6 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??