Tenda W268R (earlier)
Tenda W268R (earlier)
FCC approval date: 13 August 2009
Country of manuf.: China
Type: wireless router
FCC ID: V7TW268R
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3050
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160DBTI-70G)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (EtronTech EM638165TS-6G)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Flags: schematics
Default SSID: Tenda (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 33 are Tenda devices
| FCC ID | |
|---|---|
| AmbiCom WL151N-AR | V7TW268R |
| Medialink MWN-WAPR150N | XKPMWN-WAPR150N V7TW268R |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Tenda W268R (earlier) | Ralink | Ralink | |
| Tenda W268R (later) | Broadcom | Broadcom |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Broadband Router
"V1.0" is silkscreened on the board in the FCC photos.
"V1.1" is silkscreened on the board in the images below (of which the board seems to be identical to the Nexxt Solutions Nebula 150 [W311R] PCB)
The schematics show the device as using a KH29LV320CBTC-70G / KH29LV160CBTC-70G Flash chip and a HY57V641620FTP-7 RAM chip (w/ a note that the second module may not be installed when using RT3050). The device is shown as using one RAM chip in the internal photos.
The power supply included with the router pictured below is a Shenzhen Heweishun Network Technology TEA09-09060 (9V, 0.6A). ID/OD/Len measurements are approximate.
The FCC EUT's label shows it as having a MAC starting with 00:B0:0C. This OUI may be used for some units..
Images
- board shots from some RT3050 based W268R revision
board top
board bottom
Used PSU(s)
At least some of these routers are using Shenzhen Heweishun Network Technology TEA09-09060s (9V, 0.6A).
| Shenzhen Heweishun Network Technology TEA09-09060 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 50/60 Hz, 0.3 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Manuf. in: China Eff. level: 5 | |||||
| Output: 9 VDC, 0.6 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
