Medialink MWN-WAPR150N
Medialink MWN-WAPR150N
Manuf (OEM/ODM): Tenda W268R
Type: wireless router
FCC ID: XKPMWN-WAPR150N, V7TW268R
Power: 9 VDC, 0.6 A
Connector type: barrel
CPU1: Ralink RT3050
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320EBTI-70G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691;212, 6691, A121;1;
Default SSID: medialink (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 783 additional devices
of which 0 are Medialink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1321 additional devices
of which 3 are Medialink devices
| FCC ID | |
|---|---|
| AmbiCom WL151N-AR | V7TW268R |
| Tenda W268R (earlier) | V7TW268R |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Broadband Router with Internal Antenna
It is possible that the hardware of these units may vary...
Per WiGLE and the User Guide, the default SSID seems to be medialink w/ an OUI of 14:35:8B (Mediabridge Products).
Additional external links
- On the DD-WRT forums (internal photos)
- 4MB Flash (Macronix MX29LV320EBTI-70G) and 16MB RAM (EtronTech EM639165TS-6G) in Broesphs post
- 9V, 0.6A on the label
- similar appearance to the Tenda W268R (later)
Images
M86's images
- external
angled
unit bottom
unit label
unit back
- internal
board top, in case
board top, in case, 2
board top, angled, from the front
board top, angled, from the back
antenna
Flash
RAM
heatsink'ed SoC, RF
board bottom
