WatchGuard AP300

WatchGuard AP300 v1.0.1
Availability: EoL (12/31/2019)

Manuf (OEM/ODM): Senao

FCC approval date: 01 December 2015
Country of manuf.: Taiwan

Type: access point

FCC ID: Q6G-AP300
IC ID: 4657A-AP300
PCB ID: 7016A0886008

Power: 12 VDC, 1.25 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: 802.3af/at, standard

CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Spansion FL256SAIFRO)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5TU64M16HG-AC)

Expansion IFs: Mini PCIe
Mini PCIe slots: 1
JTAG: yes, 14-pad header, unpopulated, J1
Serial: yes, 4-pin header, populated, 3.3V TTL, J10

WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL (internal)
WI2 module: unknown
WI2 module IF: Mini PCIe
WI2 chip1: Qualcomm Atheros QCA9880-BR4A
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL (internal)

ETH chip1: Qualcomm Atheros QCA9558
ETH chip2: Atheros AR8035-A
LAN speed: 1GbE
LAN ports: 1

abgn+ac

Additional chips
3A 28V Step-Down Converter;TI;TPS54331;;1;
802.3at PoE Interface and DC/DC Controller;TI;TPS23754;;1;
13A 30V Single N-Channel Logic Level MOSFET;Fairchild;FDS6670A;;2;
1A Schottky Bridge Rectifier;Central Semiconductor;CBRHDSH1-100;;2;
2.4GHz High-Gain Power Amplifier;Silicon Storage Technology;SST12LP15A;;3;
5mA Single Channel Phototransistor OptoCoupler;Vishay Semiconductor;TCMT1107;;3;

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 2.6.31 OpenWrt Kamikaze r20146

Flags: PoE in

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1298 additional devices
of which 2 are WatchGuard devices

802dot11 OUI: 00:90:7F (18 E, 12 W)
Ethernet OUI: 00:90:7F (18 E, 12 W)

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

---

WatchGuard AP300 Access Point

Hardware Guide

"7016A0886008 V1.00" is silkscreened on the board.

See also: WatchGuard AP100, WatchGuard AP200, Senao CAP4200AG and Senao

Hardware specification

• CPU: Qualcomm Atheros QCA9558 MIPS 74K (@720MHz)
• Memory: 256MB (SDRAM) DDR2
• Storage: 32MB SPI NOR Flash
• WiFi: Qualcomm Atheros QCA9558 (802.11bgn)

Qualcomm Atheros QCA9880 (802.11an/ac)

• Network: 1x Gigabit Ethernet ports
• Power: 12V, 1.25A via barrel or 802.3af/at PoE

Images

---

• 

  Board Top

• 

  Board Bottom