ZyXEL P-2601HN-F1
ZyXEL P-2601HN -F1
Type: wireless router, dsl modem, analog phone gateway
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Lantiq PSB 50800 (333 MHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX29GL128EHT2I-90G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (ProMOS V58C2512164SDI5)
Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 chip1: Ralink RT3070L
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: soldered
ETH chip1: Lantiq PSB 50800
Switch: Realtek RTL8306G
LAN speed: 100M
LAN ports: 4
bgn
Additional chips
FXS chips;Lantiq;PEF 41068;PEF 41068, F V1.1, XWAY SLIC110;1;
Stock bootloader: U-Boot
Flags: ADSL2+
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 96 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 66 are ZyXEL devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
ZyXEL P-2601HN-F1 | Lantiq | Ralink | |
ZyXEL P-2601HN-F3 | Lantiq | Ralink |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
802.11n Wireless ADSL2+ with 4x FE ports Gateway
- P-2601HN-F1: One RJ-11 DSL port
- P-2601HN-F3: One RJ-45 DSL port