Cisco Meraki MR16

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Cisco Meraki MR16 -HW

Manuf (OEM/ODM): Senao

FCC approval date: 15 November 2010
Country of manuf.: Taiwan

Amazon image

ASIN
B01M8K3VO1 (Flag of the United States.svg, On Amazon, On CCC)

Type: access point

FCC ID: UDX-60012010
IC ID: 6961A-60012010
PCB ID: 7016A0441001

Power: 12 VDC, 1.5 A
Connector type: barrel
PoE tag: 802.3af, standard

CPU1: Atheros AR7161 (680 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AA160TSA-5G × 2)

Expansion IFs: none specified
Serial: yes, 4-pin header

WI1 chip1: Atheros AR9223
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Atheros AR9220
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Atheros AR7161
ETH chip2: Atheros AR8021
LAN speed: 1GbE
LAN ports: 1

abgn

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 2.6.16.16

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Flags: PoE

Default IP address: 10.128.128.128
the IP 10.128.128.128 is used by 3 additional devices
of which 1 are Cisco devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 324 additional devices
of which 1 are Cisco devices

802dot11 OUI: 00:18:0A (7 E, 6 W), 00:03:7F (2 E, 10 W)
Ethernet OUI: 00:18:0A (7 E, 6 W), 00:03:7F (2 E, 10 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


"7016A0441001 Ver:1.00" is silkscreened on the board in the FCC photos.

See also: Meraki MR66, Meraki, Cisco and Senao

This device has one Gigabit Ethernet port with PoE capability.

CPU: Atheros AR7161 @680MHz
Wireless: Atheros AR9223 2T2R 802.11bgn
Wireless: Atheros AR9220 2T2R 802.11an
Ethernet ports: Atheros AR8021 (1x GbE)

Default settings are per the FCC manual.

Serial

Connect on JP1 (J1 has square solder off on reverse of board)

Baudrate 115200N81
J1: Vcc
J2: RX
J3: TX
J4: GND

See also

Meraki