Cisco RV215W
Cisco RV215W
Manuf (OEM/ODM): CyberTAN
Type: wireless router
FCC ID: N89-RV215W
IC ID: 5005A-RV215W
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Broadcom BCM5358UB0
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AB160TSD-5G)
Expansion IFs: USB 2.0
USB ports: 1
JTAG: yes, 14-pin header, unpopulated, JC1
Serial: yes, 5-pin header, unpopulated, JC2
WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: soldered
ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Additional chips
Dual USB High-Side Power Switch;Analog Integrations Corporation;AIC1526;;1;
Default SSID: ciscosb1 (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 18 are Cisco devices
Default login user: cisco
Default login password: cisco
cisco:cisco credentials used by 14 additional devices
of which 14 are Cisco devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
"3763-12100501R" and the Cisco logo is silkscreened on the board in the FCC photos.
This device is using two Skyworks (SiGe) SE2598L / 2598L 2.4GHz power amplfiers.
Per the FCC manual, the RF output power is 18 dBm. The default credentials are also from the FCC manual.
