Netgear ReadyNAS Duo v2 (RND2000-200)
Jump to navigation
Jump to search
Netgear ReadyNAS Duo v2 (RND2000-200)
(Est.) release date: 06 November 2011
Country of manuf.: China
Type: NAS enclosure
Power: 12 VDC, 5 A
CPU1: Marvell 88F6282 (1.6 GHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Hynix H27U1G8F2BTR)
FLA2: 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> (Atmel AT25F512B)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Hynix H5TQ1G83DFR-H9C × 2)
Expansion IFs: USB 3.0, USB 2.0, SATA
USB ports: 3
SATA ports: 2
JTAG: yes, 10-pin header
Serial: yes, 4-pin header, populated, (115200 8N1)
ETH chip1: Marvell 88F6282
ETH chip2: Marvell 88E1318
LAN speed: 1GbE
LAN ports: 1
Additional chips
I2C Real Time Clock;Ricoh;RS5C372A;;1;
USB 3.0 Host Controller;NEC;μPD720200;;1;
SMBUS Advanced Power Controller;Nuvoton;NCT3012S;;1;
30V, 8.8A P-Channel MOSFET;Fairchild Semiconductor;FDS4435BZ;;1;
30V, 7A N-Channel MOSFET;Fairchild Semiconductor;FDS8984;;1;
5V/12V Synchronous Buck PWM DC/DC Controller;Richtek;RT8105;;1;
4.5V/18V Synchronous Step-Down Buck Switcher;TI;TPS65251;;1;
Field Programmable DSP Switcher;Marvell;G47B;;1;
PWM Fan Controller;GMT;G762;;1;
Stock bootloader: U-Boot 1.1.4 Marvell 3.4.27
Stock FW OS: Linux 2.6.31.8
Flags: RTC w/ battery backup, fan
Default IP address: 192.168.168.168
the IP 192.168.168.168 is used by 11 additional devices
of which 2 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
| CPU1 brand | FLA1 | RAM1 | |
|---|---|---|---|
| Netgear ReadyNAS Duo v1 (RND2000-100) | Infrant | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| Netgear ReadyNAS Duo v2 (RND2000-200) | Marvell | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Diskless 2-Bay/USB 3.0 Network Storage for Home/SoHo Users
- Netgear RND2000-200 ReadyNAS Duo v2
• Support page • Debian and upstream kernel
Rear 2 USB Ports are from the USB 3.0 Host Controller
- whose configuration is provided by the 2nd Flash.
- HDD
- RND2110 • HDD 1TB
- RND2150 • HDD 500GB
- RND2175 • HDD 750GB
See also: Netgear and List of NAS Devices
Models
Boot log
| • Boot log • >> |
|---|
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Jun 29 2012 - 16:06:40) Marvell version: 3.4.27
Netgear version: Uboot-1_1_4-NetgearDUOV3-V1009
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006D0120
Soc: MV88F1155 Rev 1 (DDR3)
CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM unknown CAL tRP = 8 tRAS = 20 tRCD=8
DRAM CS[0] base 0x00000000 size 256MB
DRAM Total size 256MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:128 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
Switch On !
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x200000, size 0x600000
Reading data from 0x7ff800 -- 100% complete.
6291456 bytes read: OK
NAND read: device 0 offset 0x800000, size 0x1000000
Reading data from 0x17ff800 -- 100% complete.
16777216 bytes read: OK
## Booting image at 01200000 ...
Image Name: Linux-2.6.31.8.duov2
Created: 2013-04-18 10:25:25 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3442360 Bytes = 3.3 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02000000 ...
Image Name: initrd
Created: 2013-04-19 3:06:56 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4382833 Bytes = 4.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux.... done, booting the kernel.
Linux version 2.6.31.8.duov2 (root@NSBU-NJ) (gcc version 4.3.2
(sdk3.2rc1-ct-ng-1.4.1) ) #1 Thu Apr 18 18:24:47 HKT 2013
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
Kernel command line: console=ttyS0,115200 reason=normal mtdparts=nand_mtd:
0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),
0x1000000@0x800000(minirootfs),0x6800000@0x1800000(jffs2);
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 242176KB available (6108K code, 622K data, 128K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 1599.07 BogoMIPS (lpj=7995392)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
xor: measuring software checksum speed
arm4regs : 1454.400 MB/sec
8regs : 1103.200 MB/sec
32regs : 1237.200 MB/sec
xor: using function: arm4regs (1454.400 MB/sec)
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
PEX1_MEM ....base e8000000, size 128MB
PEX1_IO ....base f2100000, size 1MB
INTER_REGS ....base f1000000, size 1MB
NFLASH_CS ....base fa000000, size 2MB
SPI_CS ....base f4000000, size 16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size 2MB
Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)--
DB-88F6282A-BP Soc: MV88F6282 Rev 1 LE
Detected Tclk 200000000 and SysClk 533333333
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c8002cc0
PEX0 interface detected Link X1
PEX1 interface detected no Link.
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
pci 0000:01:01.0: PME# disabled
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
PCI: bus3: Fast back to back transfers enabled
pci 0000:02:01.0: PCI bridge, secondary bus 0000:03
pci 0000:02:01.0: IO window: disabled
pci 0000:02:01.0: MEM window: disabled
pci 0000:02:01.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xe0000000-0xe00fffff
pci 0000:00:01.0: PREFETCH window: disabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 123 MB/s
raid6: int32x2 158 MB/s
raid6: int32x4 173 MB/s
raid6: int32x8 132 MB/s
raid6: using algorithm int32x4 (173 MB/s)
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 4280K
rtc mv_rtc: rtc core: registered kw-rtc as rtc0
RTC registered
cpufreq: Init kirkwood cpufreq driver
XOR registered 4 channels
XOR 2nd invalidate WA enabled
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.12)
msgmni has been set to 481
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
alg: No test for hmac(digest_null) (hmac(digest_null-generic))
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
loop: module loaded
Integrated Sata device found
IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
Loading Marvell Ethernet Driver:
o Cached descriptors in DRAM
o DRAM SW cache-coherency
o 1 Giga ports supported
o Multi RX Queue support - 4 RX queues
o Multi TX Queue support - 2 TX Queues
o TCP segmentation offload (TSO) supported
o Large Receive offload (LRO) supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Network Fast Processing (Routing) supported - (Disabled)
o Driver ERROR statistics enabled
o Driver INFO statistics enabled
o Proc tool API enabled
o SKB Reuse supported - (Enabled)
o SKB Recycle supported - (Enabled)
o Gateway support enabled
o Using Marvell Header Mode
o L2 IGMP support
o Rx descripors: q0=128 q1=128 q2=128 q3=128
o Tx descripors: q0=532 q1=532
o Loading network interface(s):
o register under mv88fx_eth platform
o eth0, ifindex = 2, GbE port = 0
mvFpRuleDb (c8d54000): 2048 entries, 8192 bytes
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Using Hamming 1-bit ECC for NAND device
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
mtd: no mtd-id
5 cmdlinepart partitions found on MTD device nand_mtd
Using command line partition definition
Creating 5 MTD partitions on "nand_mtd":
0x000000000000-0x000000180000 : "u-boot"
0x000000180000-0x0000001a0000 : "u-boot-env"
0x000000200000-0x000000800000 : "uImage"
0x000000800000-0x000001800000 : "minirootfs"
0x000001800000-0x000008000000 : "jffs2"
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:01.0: xHCI Host Controller
xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:01.0: irq 9, io mem 0xe0000000
xhci_hcd 0000:01:01.0: Failed to enable MSI-X
xhci_hcd 0000:01:01.0: failed to allocate MSI entry
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:01:01.0: xHCI Host Controller
xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
pwrctl: dev_t_NO. = 0xdd00000, major = 221
USB 3.0 Port Power On, Waiting for 3 seconds
HDD_pwrctl_init
MPP26 Low.
MPP28 Low.
Request the irq HDDpwrctrl success.
Just power off HDD(2).
Just power off HDD(1).
Todo: mknod /dev/buttons c 253 0
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Registered led device: backup
Registered led device: sys
Registered led device: sys_fail
Registered led device: SATA1_act
Registered led device: SATA2_act
Registered led device: power
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
rtc mv_rtc: setting system clock to 2060-05-07 20:17:57 UTC (2851186677)
Freeing init memory: 128K
Starting the boot process...
systype=12
Loading kernel modules...armvpd: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ReadyNAS Pro VPD device driver init...
Tuxera NTFS driver 3011.10.19 [Flags: R/W MODULE].
eth0: link down
eth0: started
done
ERROR: No disks detected!
Bringing up network...eth0.done
Extracting supplemental utilities...
done
/bin/ash: can't access tty; job control turned off
|
- /proc/mtd
| • /proc/mtd • >> |
|---|
dev: size erasesize name mtd0: 00180000 00020000 "u-boot" mtd1: 00020000 00020000 "u-boot-env" mtd2: 00600000 00020000 "uImage" mtd3: 01000000 00020000 "minirootfs" mtd4: 06800000 00020000 "jffs2" |
- mount
| • mount • >> |
|---|
rootfs on / type rootfs (rw) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) tmpfs on /dev type tmpfs (rw,relatime,size=10240k,mode=755) devpts on /dev/pts type devpts (rw,relatime,mode=600) |
- ps
| • ps • >> |
|---|
PID USER TIME COMMAND
1 root 0:20 /init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [events/0]
5 root 0:00 [khelper]
8 root 0:00 [async/mgr]
123 root 0:00 [kblockd/0]
132 root 0:00 [khubd]
154 root 0:00 [crypto]
155 root 0:00 [crypto_ret]
162 root 0:00 [pdflush]
163 root 0:00 [pdflush]
164 root 0:00 [kswapd0]
210 root 0:00 [aio/0]
225 root 0:00 [nfsiod]
234 root 0:00 [cifsoplockd]
240 root 0:00 [crypto/0]
522 root 0:00 [scsi_tgtd/0]
524 root 0:00 [scsi_eh_0]
525 root 0:00 [scsi_eh_1]
544 root 0:00 [mtdblockd]
545 root 0:00 [nftld]
594 root 0:00 [kstriped]
597 root 0:00 [ksnapd]
632 root 0:00 [usbhid_resumer]
644 root 0:00 [rpciod/0]
665 root 0:02 [ifplugd]
689 root 0:00 udhcpc -R -n -p /var/run/udhcpc.eth0.pid -i eth0
695 root 0:00 /usr/sbin/raidard
699 root 0:00 [tar]
703 root 0:00 sh -c /bin/ash
704 root 0:00 /bin/ash
707 root 0:00 /usr/sbin/telnetd
710 root 0:00 ps
|
See also
- Netgear ReadyNAS RN102
- Netgear ReadyNAS RN104
- Netgear ReadyNAS RN212
- Netgear ReadyNAS RN2120 v2
- Netgear ReadyNAS RN3138
- Netgear ReadyNAS NV+ RND4000 (v2)
- Netgear WNDR4700
- Netgear Stora MS2110
