Open-Mesh OM2P-HS

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Open-Mesh OM2P -HS

Manuf (OEM/ODM): Senao

FCC approval date: 09 October 2012
UPC: 552160054408 (UPC DB, On eBay)
Country of manuf.: Taiwan

Type: mesh node, access point

FCC ID: WT8OM2PHS
IC ID: 10103A-OM2PHS

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: non-standard

CPU1: Atheros AR9341 (520 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion FL128PIFL)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5DS32M16DS-5T)

Expansion IFs: none specified

WI1 chip1: Atheros AR9341
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Atheros AR9341
Switch: Atheros AR9341
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1

bgn

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices

802dot11 OUI: AC:86:74 (3 E, 3 W)
Ethernet OUI: AC:86:74 (3 E, 3 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


OM2P-HS 300Mbps Access Point

On Open-Mesh's store

Datasheet

"7016A0608004 Ver:1.00" is silkscreened on the board in the FCC photos.

The device uses two Lynwave ALA120-052022 antennas.

The PoE implementation in this device consists of a Passive PoE feed with pins +4,5 and -7,8 at 18 VDC.