Open-Mesh OM2P v1
Open-Mesh OM2P v1
Manuf (OEM/ODM): Senao
Type: mesh node
FCC ID: WT8-OM2P
IC ID: 10103A-OM2P
Power: 12 VDC, 1.0 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: non-standard
CPU1: Atheros AR7240 (400 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
Expansion IFs: none specified
Serial: yes, (115200,8,N,1)
WI1 chip1: Atheros AR9285
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Flags: high power
Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Open-Mesh OM2P v1 | Atheros | Atheros | |
Open-Mesh OM2P v2 | Atheros | Atheros | |
Open-Mesh OM2P-HS | Atheros | Atheros | |
Open-Mesh OM2P-HSv2 | Atheros | Atheros | |
Open-Mesh OM2P-LC | Atheros | Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Specifications, per Open-Mesh's datasheet, follow..
Transmit Power
- 11n, MCS0: 26dBm (400mW)
- 11n, MCS7: 21dBm (125mW)
Receive Sensitivity (Typical)
- 11n, MCS0: -95dBm
- 11n, MCS7: -91dBm
Power over Ethernet
- not 802.3af/at compatible
- Passive PoE feed
- 12-18VDC over pins +4,5 and -7,8
On the OpenWrt wiki
Boot log on the ROBIN forums
- Indicates AR9285 is used, which is not surprising