Open-Mesh OM2P-LC
Open-Mesh OM2P -LC
Manuf (OEM/ODM): Senao
FCC approval date: 19 September 2012
Country of manuf.: Taiwan
Type: mesh node, access point
FCC ID: WT8OM2PLC
IC ID: 10103A-OM2PLC
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: non-standard
CPU1: Atheros AR9331 (400 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion FL128PIFL)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5DS32M16DS-5T)
Expansion IFs: none specified
WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: Atheros AR9331
Switch: Atheros AR9331
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Open-Mesh OM2P v1 | Atheros | Atheros | |
Open-Mesh OM2P v2 | Atheros | Atheros | |
Open-Mesh OM2P-HS | Atheros | Atheros | |
Open-Mesh OM2P-HSv2 | Atheros | Atheros | |
Open-Mesh OM2P-LC | Atheros | Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
OM2P-LC 150Mbps Access Point
- Datasheet for the OM2P series
- Transmit Power is noted to be 20dBm...
"7016A0604001 Ver:1.00" is silkscreened on the board in the FCC photos.
An Atheros logo is visible on the WiSoC in the FCC internal photos.
The SoC is presumed to be AR9331 based on the specifications of the device.
- AR9330 / Hornet based (AR9331 and AR1311 being included in that family)
Changeset to support the device on the OpenWrt Trac
The PoE implementation in this device consists of a Passive PoE feed with pins +4,5 and -7,8 at 18 VDC.