Pace 5268AC
Pace 5268AC
Availability: now
Manuf (OEM/ODM): Foxconn
FCC approval date: 19 May 2014
Country of manuf.: China
Type: CPE, dsl modem, wireless router
FCC ID: PGR5200AC
IC ID: 3439B-5200AC
US: 6KRDL02B5200AC
Power: 12 VDC, 3 A
Connector type: barrel
CPU1: Broadcom BCM63168 (400 MHz, 2 cores)
CPU2: Quantenna QT3840BC (500 MHz, 2 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung NAND)
FLA2: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond SPI)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung Model?)
RAM2: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung Model?)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM63168
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Quantenna QT3840BC
WI2 chip2: Quantenna QT2518B
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:4
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM63168
Switch: Broadcom BCM53125
LAN speed: 1G
LAN ports: 4
abgn+ac
Stock bootloader: U-Boot
Stock FW OS: Linux 2.6.30
Flags: VDSL2, ADSL2+
Default SSID: PACE501
, PACE501_5G
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 1 are Pace devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
Wireless 802.11AC DSL Residential Gateway
- Product page (Arris)
- 5268AC XDSL VOICE GATEWAY • FCC Doc
- VDSL2, ADSL2+ Gateway with 802.11ac Wi-Fi & HomePNA
- 5GHz 4x4 802.11ac (1733Mbps) / 2.4GHz 2x2 802.11n (300Mbps)
- Dual-core processor with hardware accelerated routing for exceptional performance.
- Based on cutting-edge 4x4 MU-MIMO Wi-Fi technology 5268AC intelligent gateway.
- In 2.4GHz band gateway uses 802.11n 2x2 MIMO technology, transmit power 100 mW.
- Integrated Gigabit Ethernet switch and dedicated Gigabit Ethernet WAN port enables.
The manual states the default IP is 192.168.1.254.
Forum threads
Serial
• Bootlog |
---|
@@mmmmmmmmoyM~oV3g_w_o{{{{~KmK!S}_p[b?}cks|}{m{__o ! I0 <I0MyY~o|3q|9{}c{6Dws>{XA A0qy }~{}[[o q ZQp >?kq0I{l{_[__m{?oy_ HOLA CPUI L1CI HOLA CPUI L1CI DRAM ---- PHYS STRF 400H PHYE DDR3 SIZ4 SIZ3 DINT USYN LSYN MFAS LMBE RACE PASS ---- CODE L12F MAIN **************************************************************** **************************************************************** ************************$ U-Boot 1.3.3(8.99.61.509224) (Aug 5 2015 - 18:13:23) CPU: Broadcom BCM63268 v8.0 64 kB I-Cache 32 kB D-Cache BOARD: Pace Broadcom BCM63168D0 DRAM: 256 MB Clearing heap 4259840 bytes from 8fb84000 to 8ff94000 NAND: BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d BCMNAND: System strap=1fff5bf 2048,11,1 BCMNAND: NAND: AccControl=f7001010 BCMNAND: Nand Part Name: Macronix MX30LF1G08AA LP BCMNAND: size=128MB, block=128KB, page=2048B, spare=64 BCMNAND: Init done: 0 OOB[1/131072]ff ff cf 69 ff ff 99 a6 42 6f 6f 74 43 6f 64 65 OOB[2/262144]ff ff 96 ff ff ff 3 f 42 6f 6f 74 43 6f 64 65 OOB[3/393216]ff ff cf 0 ff ff f ff 42 6f 6f 74 43 6f 64 65 OOB[4/524288]ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB scan: Found pattern mismatch at 4/524288 Fixed up MTD partition to mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) OpenTL: Going to add mtd partition tlpart Creating 1 MTD partitions on "nand0": 0x00180000-0x08000000 : "tlpart" BCMNAND: IsBad block at off=69337088 is bad OPENTL: add_mtd for tlpart nflaattach: pages per unit=64 shift=17 sectors_per_page=4 TL_debug: before mount mediasize=64768 size=64768 partiton 0 to 1012 spares=85 Adjusting virtual blocks 1012 to account for 30 bb blocks Adjusting virtual blocks 982 to account for 1 stat blocks resetting statsBlock statistics Num Used=712 Num Free=299 Bad=1 TL_debug: after mount stat_blocks=1 virt=982 head_pages=1 geometry wasted 252 sectors nand_geom: cap=251132 cyl=980 nhead=16 nsectors=16 OPENTL: Found new opentla OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=1------------ ** Checking 5 partitions... ** Partition(0) 8/80 blocksize=512 ** Partition(1) 88/80 blocksize=512 ** Partition(2) 0/3c200 blocksize=512 ** Partition(3) 108/78 blocksize=512 ** Partition(4) 180/3c080 blocksize=512 ** Part(1) is at 8 to 128 sectorsize=512 tldisk primary, 8:128 -----------get_partition_info_disklabel: Called part=2------------ ** Part(2) is at 136 to 128 sectorsize=512 tldisk backup, 136:128 env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6 3 6b 66 73 74 79 70 65 20 35 tldisk env part info: CRC=54e42eca/54e42eca env_size=65531 env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6 3 6b 66 73 74 79 70 65 20 35 tldisk env part info: CRC=54e42eca/54e42eca env_size=65531 In: serial Out: serial Err: serial Board Id : 260-2173300 Hello world Net: br0 Hit any key to stop autoboot: 0 OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 OpenTL: get_dev hook called Using device opentl 0:5, directory: / -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 <DIR> 1024 . <DIR> 1024 .. <DIR> 1258496 lost+found <DIR> 1024 tmp <DIR> 1024 sys1 <DIR> 1024 bcm <DIR> 1024 sys2 <DIR> 1024 cm <DIR> 1024 pkg <DIR> 1024 sysinit <DIR> 1024 subsys 2 isupgrade <DIR> 1024 service <DIR> 1024 config OpenTL: get_dev hook called Using device opentl0, partition 5 -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 Loading from block device opentl device 0, partition 5: Name: Disklabel:4 Type: U-Boot File:/sys1/uImage -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 2990665 bytes read Upgrade Image present. Checking image integrity ## Checking Image at 80800000 ... Legacy image found Image Name: Install image Created: 2016-01-21 22:47:52 UTC Image Type: MIPS Linux Multi-File Image (gzip compressed) Data Size: 2990601 Bytes = 2.9 MB Load Address: 80010000 Entry Point: 80389b70 Contents: Image 0: 2232244 Bytes = 2.1 MB Image 1: 758345 Bytes = 740.6 kB Verifying Checksum ... OK Valid kernel Found OpenTL: get_dev hook called Using device opentl0, partition 5 -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 Loading from block device opentl device 0, partition 5: Name: Disklabel:4 Type: U-Boot File:/sys1/initrd -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 ** Unable to read "/sys1/initrd" from opentl 0:5 ** No initrd Image ## Booting kernel from Legacy Image at 80800000 ... Image Name: Install image Created: 2016-01-21 22:47:52 UTC Image Type: MIPS Linux Multi-File Image (gzip compressed) Data Size: 2990601 Bytes = 2.9 MB Load Address: 80010000 Entry Point: 80389b70 Contents: Image 0: 2232244 Bytes = 2.1 MB Image 1: 758345 Bytes = 740.6 kB Verifying Checksum ... OK Uncompressing Multi-File Image ... OK ## Loading init Ramdisk from multi component Legacy Image at 80800000 ... ## U-boot passing env 0x80A21000 ## U-boot passing env 0xB9249 Starting kernel commandline=console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops. record_size=131072 mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) init =/bin/init 6,afb63fb0,afb64440... [ 0.000000] Linux version 2.6.30 (buildbot@krackel) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 SMP PREEMPT Thu Jan 21 16:46:53 CST 2016 [ 0.000000] BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d [ 0.000000] BCMNAND: System strap=1fff5bf 2048,11,1 [ 0.000000] BCMNAND: NAND: AccControl=f7001010 [ 0.000000] BCMNAND: size=128MB, block=128KB, page=2048B, spare=64 [ 0.000000] BRCMNAND device: block: 131072 page: 2048 name: nand0 [ 0.000000] Nand Scan: Block 529 is factory bad... [ 0.000000] >> nand_scan_part - Total 1 bad and 1023 good blocks found [ 0.000000] BRCM NAND flash device: name nand0, id 0xc2f1 size 131072KB [ 0.000000] detected as Boot Flash [ 0.000000] kerSysEarlyFlashInit: NVRAM size=4092 CRC 8e6f3237 8e6f3237 [ 0.000000] 260-2173300 prom init [ 0.000000] Found arg console=ttyS0,115200 of length 20 left=4074 [ 0.000000] Found arg mtdoops.mtddev=mtdoops of length 22 left=4053 [ 0.000000] Found arg mtdoops.record_size=131072 of length 26 left=4030 [ 0.000000] Found arg mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) of length 56 left=4003 [ 0.000000] Found arg init=/bin/init of length 14 left=3946 [ 0.000000] Found env memsize=256 of length 11 [ 0.000000] Found env rd_start=0x80A21000 of length 19 [ 0.000000] Found env rd_size=0xB9249 of length 15 [ 0.000000] Found env flash_start=0xFFFFCDDF of length 22 [ 0.000000] Found env flash_size=0xFFFFDBFF of length 21 [ 0.000000] U-boot passed args console=ttyS0,115200 console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader), 1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 board .battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6 board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 board.srom_patch=5 board.voice_parm=1 board.wlan_config=2 left=3667 copied=429 [ 0.000000] CPU revision is: 0002a080 (Broadcom4350) [ 0.000000] DSL SDRAM reserved: 0x180000 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 0fe80000 @ 00000000 (usable) [ 0.000000] Initial ramdisk at: 0x80a21000 (758345 bytes) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fe80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000fe80 [ 0.000000] On node 0 totalpages: 65152 [ 0.000000] free_area_init_node: node 0, pgdat 804716f0, node_mem_map 81000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 477 pages used for memmap [ 0.000000] Normal zone: 60579 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64643 [ 0.000000] Kernel command line: console=ttyS0,115200 console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader), 1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 board.battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6 board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 board.srom_patch=5 board.voice_parm=1 board.wlan_config=2 [ 0.000000] wait instruction: enabled [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:128 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] console [ttyS0] enabled [ 0.001000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.003000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Allocating memory for DSP module core and initialization code [ 0.005000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0 [ 0.026000] Memory: 247000k/260608k available (3597k kernel code, 13404k reserved, 912k data, 184k init, 0k highmem) [ 0.027000] Calibrating delay loop... 398.33 BogoMIPS (lpj=199168) [ 0.049000] Mount-cache hash table entries: 512 [ 0.050000] --Kernel Config-- [ 0.051000] SMP=1 [ 0.052000] PREEMPT=1 [ 0.053000] DEBUG_SPINLOCK=1 [ 0.054000] DEBUG_MUTEXES=1 [ 0.055000] Broadcom Logger v0.1 Jan 21 2016 16:19:52 [ 0.061000] CPU revision is: 0002a080 (Broadcom4350) [ 0.061000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.061000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes [ 0.062000] Calibrating delay loop... 403.45 BogoMIPS (lpj=201728) [ 0.082000] Brought up 2 CPUs [ 0.083000] Synchronize counters across 2 CPUs: done. [ 0.086000] khelper used greatest stack depth: 15316 bytes left [ 0.091000] net_namespace: 1180 bytes [ 0.093000] NET: Registered protocol family 16 [ 0.097000] [ 0.097000] *** kerSysFlashInit .... [ 0.440000] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00008a56-00008a66=-16<300) [ 0.442000] registering PCI controller with io_map_base unset [ 0.443000] registering PCI controller with io_map_base unset [ 0.445000] khelper used greatest stack depth: 15256 bytes left [ 0.485000] khelper used greatest stack depth: 15040 bytes left [ 0.500000] bio: create slab <bio-0> at 0 [ 0.504000] SCSI subsystem initialized [ 0.506000] usbcore: registered new interface driver usbfs [ 0.507000] usbcore: registered new interface driver hub [ 0.508000] usbcore: registered new device driver usb [ 0.510000] pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10005fff] [ 0.511000] pci 0000:00:00.0: supports D1 D2 [ 0.512000] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.513000] pci 0000:00:00.0: PME# disabled [ 0.514000] pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff] [ 0.515000] pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff] [ 0.518000] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.519000] pci 0000:01:00.0: PME# disabled [ 0.521000] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.522000] pci 0000:01:00.0: IO window: disabled [ 0.523000] pci 0000:01:00.0: MEM window: disabled [ 0.524000] pci 0000:01:00.0: PREFETCH window: disabled [ 0.525000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 0.527000] khelper used greatest stack depth: 14648 bytes left [ 0.531000] skbFreeTask created successfully [ 0.532000] BLOG v3.0 Initialized [ 0.533000] BLOG Rule v1.0 Initialized [ 0.534000] Broadcom IQoS v0.1 Jan 21 2016 16:23:37 initialized [ 0.535000] Broadcom GBPM v0.1 Jan 21 2016 16:23:37 initialized [ 0.542000] NET: Registered protocol family 8 [ 0.543000] NET: Registered protocol family 20 [ 0.550000] NET: Registered protocol family 2 [ 0.566000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.575000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.583000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.591000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.598000] TCP reno registered [ 0.605000] NET: Registered protocol family 1 [ 0.610000] Unpacking initramfs... [ 2.127000] Freeing initrd memory: 740k freed [ 2.137000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.143000] squashfs: version 4.0 with LZMA457 ported by BRCM [ 2.150000] fuse init (API version 7.11) [ 2.154000] msgmni has been set to 484 [ 2.164000] io scheduler noop registered (default) [ 2.169000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 2.198000] khelper used greatest stack depth: 14504 bytes left [ 2.216000] loop: module loaded [ 2.219000] Driver 'sd' needs updating - please use bus_type methods [ 2.227000] PPP generic driver version 2.4.2 [ 2.232000] PPP Deflate Compression module registered [ 2.237000] PPP BSD Compression module registered [ 2.242000] NET: Registered protocol family 24 [ 2.255000] BCMNAND: pReg=40000001 Cfg=15142200 CsAndNor=0 Acc=f7001010 Id=c2f1801d [ 2.263000] BCMNAND: System strap=1fff5bf 800,11,1 [ 2.268000] BCMNAND: NAND: AccControl=f7001010 [ 2.272000] BCMNAND: size=128MB, block=128KB, page=2048B, spare=64 [ 2.278000] BCMNAND: Init done [ 2.282000] MTD partition(0) offset=0 size=524288 num=3 [ 2.287000] MTD partition(1) offset=524288 size=1048576 num=3 [ 2.293000] MTD partition(2) offset=1572864 size=132644864 num=3 [ 2.299000] 3 cmdlinepart partitions found on MTD device mtd-0 [ 2.305000] Creating 3 MTD partitions on "mtd-0": [ 2.310000] 0x000000000000-0x000000080000 : "loader" [ 2.318000] 0x000000080000-0x000000180000 : "mtdoops" [ 2.331000] mtdoops: Attached to MTD device 1 [ 2.336000] mtdoops: ready 0, 1 [ 2.340000] 0x000000180000-0x000008000000 : "tlpart" [ 2.370000] BCMNAND: IsBad block at off=69337088 is bad [ 2.431000] ntl_init_phase_1: adding EB 517 to bad list [ 2.598000] opentla:tldisk_partition: going to enumerate [ 2.607000] parse_bsd: tldisk header... [ 2.611000] opentla0: <tldisk: [ 2.614000] * parse_bsd: Partition 8/80 1d/0 [ 2.619000] parse_bsd: adding tldisk partition at 1/8 [ 2.624000] opentla1 [ 2.626000] * parse_bsd: Partition 88/80 1d/0 [ 2.631000] parse_bsd: adding tldisk partition at 2/8 [ 2.636000] opentla2 [ 2.638000] * parse_bsd: Partition 108/78 1c/0 [ 2.643000] parse_bsd: adding tldisk partition at 3/8 [ 2.648000] opentla3 [ 2.651000] * parse_bsd: Partition 180/3c080 11/0 [ 2.656000] parse_bsd: adding tldisk partition at 4/8 [ 2.661000] opentla4 > [ 2.669000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.676000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) [ 2.682000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 2.689000] ehci_hcd 0000:00:0a.0: EHCI Host Controller [ 2.695000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [ 2.703000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM [ 2.729000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500 [ 2.740000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00 [ 2.746000] usb usb1: configuration #1 chosen from 1 choice [ 2.753000] hub 1-0:1.0: USB hub found [ 2.757000] hub 1-0:1.0: 2 ports detected [ 2.764000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.770000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002) [ 2.776000] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 2.783000] ohci_hcd 0000:00:09.0: OHCI Host Controller [ 2.789000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 [ 2.797000] ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600 [ 2.858000] usb usb2: configuration #1 chosen from 1 choice [ 2.864000] hub 2-0:1.0: USB hub found [ 2.868000] hub 2-0:1.0: 2 ports detected [ 2.875000] usbcore: registered new interface driver usblp [ 2.881000] Initializing USB Mass Storage driver... [ 2.886000] usbcore: registered new interface driver usb-storage [ 2.893000] USB Mass Storage support registered. [ 2.899000] Registered led device: pace-5268:green:ethernet [ 2.905000] Registered led device: pace-5268:red:ethernet [ 2.911000] Registered led device: pace-5268:red:service [ 2.917000] Registered led device: pace-5268:green:service [ 2.924000] Registered led device: pace-5268:red:power [ 2.929000] Registered led device: pace-5268:green:power [ 2.936000] Registered led device: pace-5268:green:phone2 [ 2.942000] Registered led device: pace-5268:red:phone2 [ 2.948000] Registered led device: pace-5268:green:phone1 [ 2.954000] Registered led device: pace-5268:red:phone1 [ 2.960000] Registered led device: pace-5268:green:dsl2 [ 2.966000] Registered led device: pace-5268:red:dsl2 [ 2.972000] Registered led device: pace-5268:green:dsl1 [ 2.978000] Registered led device: pace-5268:red:dsl1 [ 2.984000] Registered led device: pace-5268:green:wps [ 2.990000] Registered led device: pace-5268:red:wps [ 2.996000] Registered led device: pace-5268:green:wifi [ 3.002000] Registered led device: pace-5268:red:wifi [ 3.008000] Registered led device: pace-5268:green:usb [ 3.014000] Registered led device: pace-5268:red:usb [ 3.020000] Registered led device: pace-5268:red:hpna [ 3.025000] brcmboard: brcm_board_init entry [ 3.030000] @@@ System Mac address table initialized ... [ 3.035000] SES: Button Interrupt 0x1 is enabled [ 3.040000] SES: LED GPIO 0x24 is enabled [ 3.044000] PCIe: No device found - Powering down [ 3.251000] IRQ 8/brcm_8: IRQF_DISABLED is not guaranteed on shared IRQs [ 3.263000] Serial: BCM63XX driver $Revision: 3.00 $ [ 3.268000] Magic SysRq enabled (type ^ h for list of supported commands) [ 3.275000] ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX [ 3.281000] ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX [ 3.288000] Total # RxBds=1724 [ 3.291000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized [ 3.291000] [ 3.299000] bcmPktDma_init: Broadcom Packet DMA Library initialized [ 3.305000] bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.5 Jan 21 2016 16:23:29 [ 3.314000] IPSEC SPU: SUCCEEDED [ 3.318000] GACT probability NOT on [ 3.322000] Mirror/redirect action on [ 3.326000] u32 classifier [ 3.328000] input device check on [ 3.332000] Actions configured [ 3.336000] Netfilter messages via NETLINK v0.30. [ 3.344000] GRE over IPv4 tunneling driver [ 3.351000] TCP cubic registered [ 3.354000] Initializing XFRM netlink socket [ 3.359000] NET: Registered protocol family 10 [ 3.377000] IPv6 over IPv4 tunneling driver [ 3.395000] NET: Registered protocol family 17 [ 3.399000] NET: Registered protocol family 15 [ 3.404000] Initializing MCPD Module [ 3.408000] Ebtables v2.0 registered [ 3.412000] ebt_time registered [ 3.415000] ebt_ftos registered [ 3.418000] ebt_wmm_mark registered [ 3.423000] RPC: Registered udp transport module. [ 3.428000] RPC: Registered tcp transport module. [ 3.433000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 3.440000] All bugs added by David S. Miller <davem@redhat.com> [ 3.450000] Freeing unused kernel memory: 184k freed [ 3.479000] mount used greatest stack depth: 14368 bytes left [ 3.678000] mdev used greatest stack depth: 14192 bytes left e2fsck 1.42.7 (21-Jan-2013) /dev/opentla4 was not cleanly unmounted, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Block bitmap differences: -46610 +46623 +46658 Fix? yes Free blocks count wrong for group #6 (7345, counted=7344). Fix? yes Free blocks count wrong (88239, counted=88222). Fix? yes /dev/opentla4: ***** FILE SYSTEM WAS MODIFIED ***** 134 inodes used (1.72%, out of 7808) 0 non-contiguous files (0.0%) 0 non-contiguous directories (0.0%) # of inodes with ind/dind/tind blocks: 10/4/0 34722 blocks used (28.24%, out of 122944) 0 bad blocks 0 large files 72 regular files 53 directories 0 character device files 0 block device files 0 fifos 0 links 0 symbolic links (0 fast symbolic links) 0 sockets ------------ 125 files e2fsck returned: 1 [ 6.506000] mount used greatest stack depth: 14104 bytes left [ 6.524000] mount used greatest stack depth: 13952 bytes left [ 9.631000] cp used greatest stack depth: 13744 bytes left mknod: /dev/brcmboard: File exists [ 12.435000] bcm_ingqos: module license 'Proprietary' taints kernel. [ 12.442000] Disabling lock debugging due to kernel taint [ 12.471000] Broadcom Ingress QoS Module Char Driver v0.1 Jan 21 2016 16:21:36 Registered<243> [ 12.480000] [ 12.480000] Broadcom Ingress QoS ver 0.1 initialized [ 12.609000] brcmchipinfo: brcm_chipinfo_init entry [ 12.708000] BPM: tot_mem_size=268435456B (256MB), buf_mem_size=40265310B (38MB), num of buffers=18921, buf size=2128 [ 12.719000] Broadcom BPM Module Char Driver v0.1 Jan 21 2016 16:20:15 Registered<244> [ 13.093000] [NTC bpm] bpm_set_status: BPM status : enabled [ 13.093000] [ 13.197000] NBUFF v1.0 Initialized [ 13.209000] Initialized fcache state [ 13.214000] Broadcom Packet Flow Cache Char Driver v2.2 Jan 21 2016 16:21:37 Registered<242> [ 13.223000] Created Proc FS /procfs/fcache [ 13.227000] Broadcom Packet Flow Cache registered with netdev chain [ 13.234000] Broadcom Packet Flow Cache learning via BLOG enabled. [ 13.241000] Constructed Broadcom Packet Flow Cache v2.2 Jan 21 2016 16:21:37 [ 13.597000] chipId 0x631680D0 [ 13.601000] Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Jan 21 2016 16:21:23 Registered <241> [ 13.611000] Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000 [ 13.637000] FAP Soft Reset Done [ 13.640000] 4ke Reset Done [ 13.653000] Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000 [ 13.679000] FAP Soft Reset Done [ 13.682000] 4ke Reset Done [ 13.694000] FAP Debug values at 0xabb22d00 0xabba2d00 [ 13.701000] Allocated FAP0 GSO Buffers (0xABB33D88) : 1048576 bytes @ 0xAB400000 [ 13.710000] Allocated FAP1 GSO Buffers (0xABBB3D88) : 1048576 bytes @ 0xAB500000 [ 13.718000] Allocated FAP0 TM SDRAM Queue Storage (abb33d8c) : 390144 bytes @ ab600000 [ 13.727000] Allocated FAP1 TM SDRAM Queue Storage (abbb3d8c) : 390144 bytes @ ab680000 [ 13.741000] [NTC fapProto] fapReset : Reset FAP Protocol layer [ 13.748000] fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes [ 13.756000] fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes [ 13.763000] [FAP0] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192> [ 13.773000] [FAP1] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192> [ 13.783000] [FAP0] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576> [ 13.791000] [FAP1] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576> [ 13.799000] [FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948 [ 13.806000] [FAP1] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948 [ 13.814000] [FAP0] GSO Buffer set to 0xAB400000 [ 13.818000] [FAP1] GSO Buffer set to 0xAB500000 [ 13.823000] [FAP0] FAP BPM Initialized. [ 13.827000] [FAP1] FAP BPM Initialized. [ 13.831000] bcmPktDma_bind: FAP Driver binding successfull [ 13.837000] [FAP0] FAP TM: ON [ 13.840000] [FAP1] FAP TM: ON [ 13.968000] bcmxtmcfg: bcmxtmcfg_init entry [ 14.385000] adsl: adsl_init entry [ 14.404000] modprobe used greatest stack depth: 13352 bytes left [ 14.783000] Broadcom BCM63168D0 Ethernet Network Device v0.1 Jan 21 2016 16:23:20 [ 14.800000] ext_switch_spi_init: EXT_SWITCH_ID=0x53125... [ 14.806000] BCM53125 match... [ 14.810000] fapDrv_psmAlloc: fapIdx=1, size: 7392, offset=b0a20650 bytes remaining 8104 [ 14.819000] ETH Init: Ch:0 - 308 tx BDs at 0xb0a20650 [ 14.825000] fapDrv_psmAlloc: fapIdx=0, size: 7392, offset=b0820650 bytes remaining 8104 [ 14.834000] ETH Init: Ch:1 - 308 tx BDs at 0xb0820650 [ 14.839000] fapDrv_psmAlloc: wastage 8 bytes [ 14.844000] fapDrv_psmAlloc: fapIdx=0, size: 5912, offset=b0822330 bytes remaining 2184 [ 14.852000] ETH Init: Ch:0 - 738 rx BDs at 0xb0822330 [ 14.864000] fapDrv_psmAlloc: wastage 8 bytes [ 14.868000] fapDrv_psmAlloc: fapIdx=1, size: 5912, offset=b0a22330 bytes remaining 2184 [ 14.877000] ETH Init: Ch:1 - 738 rx BDs at 0xb0a22330 [ 14.912000] Broadcom GMAC Char Driver v0.1 Jan 21 2016 16:23:27 Registered<249> [ 14.919000] Broadcom GMAC Driver v0.1 Jan 21 2016 16:23:27 Initialized [ 14.927000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered [ 14.948000] eth0: MAC Address: F8:2C:18:E2:97:55 [ 14.974000] eth1: MAC Address: F8:2C:18:E2:97:55 [ 14.995000] eth2: MAC Address: F8:2C:18:E2:97:55 [ 15.026000] eth3: MAC Address: F8:2C:18:E2:97:55 [ 15.047000] eth4: MAC Address: F8:2C:18:E2:97:55 [ 15.076000] eth5: MAC Address: F8:2C:18:E2:97:55 [ 15.098000] eth6: MAC Address: F8:2C:18:E2:97:55 [ 15.113000] modprobe used greatest stack depth: 13264 bytes left [ 15.179000] [NTC arl] arlEnable : Enabled ARL binding to FAP [ 15.185000] Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Jan 21 2016 16:20:15 Registered <245> [ 15.356000] Broadcom 802.1Q VLAN Interface, v0.1 [ 15.416000] BCM63XX_USB USB Device not present modprobe: can't load module bcm_usb (extra/bcm_usb.ko): No such device |
See also
- Pace 5168NV-110 (Arris Global Limited) - Broadcom BCM63168
- Pace 5268AC (Arris Global Limited) - Broadcom BCM63168 (testing)
- Arris NVG448B (Arris Group, Inc.) - VDSL2 CPE Broadcom BCM63148
- Arris NVG599
- Arris NVG595