UDOO NEO Basic
UDOO NEO Basic
Manuf (OEM/ODM): SECO
(Est.) release date: September 2015
(Est.) initial retail price (in USD): $35
Type: single-board computer
Power: 12 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID)
CPU1: Freescale (NXP) i.MX6SX (1 GHz)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Micron MT41K128M16JT-125 × 2)
Expansion IFs: USB 2.0
USB ports: 2
JTAG: yes, 14-pad header, J11
Serial: yes, 3.3V TTL, (115200 8N1)
ETH chip1: Freescale (NXP) i.MX6SX
ETH chip2: Microchip KSZ8091
LAN speed: 100M
LAN ports: 1
Additional chips
PMIC;NXP;MC32PF3000;;1;
Low-Power 3D HDMI Transmitter;NXP;TDA19988BHN;;1;
0.5A Dual Channel Power Switch;Diodes Inc;AP2152A;;1;
340kHz, 3A Synchronous DC-DC Buck Converter;BCD Semi;AP3503F;;2;
Triple 2-Channel Analog Multiplexer/Demultiplexer;Toshiba; 74VHC4053AFT;;2;
Stock bootloader: U-Boot
Stock FW OS: Linux 3.14.56 Ubuntu 14.04
TPFirmware supported: Android 6.0, Armbian (unofficial)
Flags: Micro SD Card slot, Micro HDMI, RTC w/ battery, LVDS, SPDIF, CAN Bus, GPIO, I2C, I2S, SPI
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 189 additional devices
of which 1 are UDOO devices
Default login user: udooer
Default login password: udooer
Ethernet OUI: none specified
| CPU1 brand | FLA1 | RAM1 | |
|---|---|---|---|
| UDOO NEO Basic | Freescale (NXP) | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| UDOO NEO Full | Freescale (NXP) | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> | 1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br /> |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
UDOO Neo
"www.udoo.org", "CSA69REVD" and "BD REVD" are silkscreened on bottom of board.
- UDOO Neo Documentation on UDOO.org Docs
- UDOO Neo = Raspberry Pi + Arduino + Wi-Fi + BT 4.0 + Sensors on Kickstarter
- UDOO Neo Development Board on CNX|Software
Hardware specification
- CPU: NXP i.MX6 SoloX (MCIMX6X4EVM10AB)
- ARM Cortex-A9 @1GHz + Cortex-M4 @200MHz
- GPU: Vivante GC420
- Memory: 512MB (SDRAM) DDR3
- Onboard Storage: TF card (max.64GB)/MMC card slot
- Ports: 1x FE LAN, 1x USB 2.0, 1x USB (OTG)
See also
