UDOO NEO Full
UDOO NEO Full
Manuf (OEM/ODM): SECO
FCC approval date: 03 February 2014
(Est.) release date: September 2015
(Est.) initial retail price (in USD): $45
Amazon image
ASIN
B07WH52T18 (, On Amazon)
multiple revisions of this device, use caution
Type: single-board computer
FCC ID: Z64-WL18SBMOD
IC ID: 4511-WL18SBMOD
Power: 12 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID)
CPU1: Freescale (NXP) i.MX6SX (1.0 GHz)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Micron MT41K256M16HA-125 × 2)
Expansion IFs: USB 2.0
USB ports: 2
JTAG: yes, 14-pad header, J11
Serial: yes, 4-pin header, 3.3V TTL, (115200 8N1)
WI1 module: Texas Instruments WL18MODGB
WI1 module IF: SDIO (module)
WI1 chip1: Texas Instruments WL1835MOD
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Freescale (NXP) i.MX6SX
ETH chip2: Microchip KSZ8091
LAN speed: 100M
LAN ports: 1
bgn
Additional chips
Low-Power 3D HDMI Transmitter;NXP;TDA19988BHN;;1;
3-Axis Digital Angular Rate Gyroscope;NXP;FXAS21002C;;1;
6-Axis Sensor w/ Accelerometer and Magnetometer;NXP;FXOS8700CQ;;1;
340kHz, 3A Synchronous DC-DC Buck Converter;BCD Semi;AP3503F;;2;
0.5A Dual Channel Power Switch;Diodes Inc;AP2152A;;1;
PMIC;NXP;MC32PF3000;;1;
Stock bootloader: U-Boot
Stock FW OS: Linux 3.14.56 Ubuntu 14.04
TPFirmware supported: Android, Armbian
Flags: Bluetooth 4.0 LE, MicroSD Card slot, HDMI, LVDS, SPDIF, CAN Bus, GPIO, RTC w/ battery backup, accelerometer, gyroscope
802dot11 OUI: none specified
FCC ID | |
---|---|
BeagleBone Black Wireless | Z64-WL18SBMOD |
BeagleBone Blue | Z64-WL18SBMOD |
Gumstix Pepper 43C | Z64-WL18SBMOD |
SeeedStudio BeagleBone Green Gateway | Z64-WL18SBMOD |
Texas Instruments WL18MODGB | Z64-WL18SBMOD S4GEM35XB |
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
UDOO NEO Basic | Freescale (NXP) | ||
UDOO NEO Full | Freescale (NXP) | Texas Instruments |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
UDOO Neo Full
Links
- UDOO Neo Documentation on UDOO.org Docs
- UDOO Neo Development Board on CNX|Software
- UDOO Neo - Raspberry Pi + Arduino + Wi-Fi/BT 4.0 on Kickstarter
Hardware specification
- CPU: NXP i.MX6 Solo X (MCIMX6X4EVM10AB)
- ARM (Cortex-A9) @1.0GHz/(Cortex-M4) @200MHz
- GPU: Vivante GC400T
- Memory: 1GB (SDRAM) DDR3
- Onboard Storage: TF card (max.64GB)/MMC card slot
See also