Banana Pi BPI M2 Berry

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Banana Pi BPI M2 Berry (V1.0)

(Est.) release date: May 2017
(Est.) initial retail price (in USD): $32
Country of manuf.: China

Amazon image

ASIN
B0773LHPKD (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: USB Female Micro-B

CPU1: Allwinner V40 (1.2 GHz, 4 cores)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Samsung KB4G1646D-BCK0 × 2)

Expansion IFs: USB 2.0, SATA 2
USB ports: 4
SATA ports: 1
Serial: yes, 3-pin header, populated, 3.3V TTL, (115200 8N1)

WI1 module: AMPAK AP6212
WI1 module IF: SDIO/UART
WI1 chip1: Broadcom BCM43430
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: integrated

ETH chip1: Allwinner V40
ETH chip2: Realtek RTL8211E
LAN speed: 1GbE
LAN ports: 1

bgn

Additional chips
PMIC;X-Powers Limited;AXP221S;;1;
USB 2.0 High Speed 4-Port Hub Controller;JFD;FE1.1s;;1;

Stock bootloader: U-Boot 2014.07

Stock FW OS: Linux 3.10.107

TPFirmware supported: Android 6.0, Armbian

Flags: Micro SD Card slot, Bluetooth 4.0, HDMI 1.4, MIPI DSI, CSI, TRRS (3.5mm), GPIO, I2C, I2S, SPI

Default login user: pi
Default login password: bananapi
pi:bananapi credentials used by 1 additional devices
of which 1 are Banana Pi devices

802dot11 OUI: none specified
Ethernet OUI: 22:3B:09

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Product page  • Support page

News

Specifications

Banana Pi BPI-M2 Berry Board
  • CPU: Allwinner V40 Quad-core (ARM Cortex-A7)
  • GPU: Mali-400 MP2 @500MHz, OpenGL ES 2.0, H.265/HEVC
  • Memory: 1GB (DDR3) @733MHz RAM (shared with GPU)
  • WiFi & BT: AMPAK AP6212, BT 4.0, SDIO
  • Video input: A CSI input connector
Camera: Supports 8-bit YUV422 CMOS sensor interface,
Supports CCIR656 protocol for NTSC and PAL,
Supports 5M pixel camera sensor,
Supports video capture solution up to 1080p @30fps
  • Video outputs: Supports HDMI v1.4 or 4-channel MIPI DSI
  • Audio outputs: HDMI or Analog via TRSS (3.5mm)
  • USB: 4x USB 2.0 host, 1x USB 2.0 (OTG) ports
  • GPIO: 40x pins header, compatible w/ Raspberry Pi B+
  • OS: Android, Ubuntu, Raspberry Pi Image
  • LED: Power Led, Status Led
  • Power: 5V/2A via Micro USB

See also