Banana Pi BPI M2 Zero

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Banana Pi BPI M2 Zero (V1.0)

Manuf (OEM/ODM): SinoVoIP

(Est.) release date: August 2017
(Est.) initial retail price (in USD): $15
Country of manuf.: China

Amazon image

B0791DZXLW (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: USB Female Micro-B

CPU1: Allwinner H2+ (1.0 GHz, 4 cores)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Samsung K4B4G1646D-BCK0)

Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 3-pin header, unpopulated, 3.3V TTL, (115200 8N1)

WI1 module: AMPAK AP6212
WI1 module IF: SDIO (module)
WI1 chip1: Broadcom BCM43430
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL


Stock bootloader: U-Boot

Stock FW OS: Linux 3.4.113 Ubuntu 16.04.2

Flags: Micro SD Card slot, Bluetooth 4.0 LE, Mini HDMI out, CSI, GPIO

802dot11 OUI: none specified

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

Product page


Banana Pi BPI-M2 Zero Board
  • CPU: Allwinner H2+ Quad-core (ARM Cortex-A7)
  • GPU: Mali-400 MP2 @600MHz, OpenGL ES 2.0, H.265/HEVC
  • Memory: 512MB (DDR3) RAM (shared with GPU)
  • WiFi/BT: AMPAK AP6212, BT 4.0, SDIO (option AP6181, AP6335)
  • Video Input: A CSI input connector
Camera: Supports 8-bit YUV422 CMOS sensor interface,
Supports CCIR656 protocol for NTSC and PAL,
Supports SM pixel camera sensor,
Supports video capture solution up to 1080p @30fps
  • Video outputs: Supports HDMI output w/ HDCP, CEC, 3D function,
Integrated CVBS, Supports simultaneous output of HDMI and CVBS
  • Audio outputs: HDMI
  • USB: 1x USB 2.0 (OTG) ports
  • GPIO: 40x pins header, compatible w/ Raspberry Pi B+
  • OS: Android, Ubuntu, Raspberry Pi Image
  • LED: Power Led & Status Led
  • Power: 5V/2A via Micro USB

See also